Add PON, GPIO, RTC and other PMIC infra modules support for pmk8350.

Signed-off-by: satya priya <[email protected]>
---
 arch/arm64/boot/dts/qcom/pmk8350.dtsi | 100 ++++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pmk8350.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi 
b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
new file mode 100644
index 0000000..13631f2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h>
+
+&spmi_bus {
+       pmk8350: pmic@0 {
+               compatible = "qcom,pmk8350", "qcom,spmi-pmic";
+               reg = <0x0 SPMI_USID>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               pmk8350_pon: pon@1300 {
+                       compatible = "qcom,pm8998-pon";
+                       reg = <0x1300>;
+
+                       pwrkey {
+                               compatible = "qcom,pmk8350-pwrkey";
+                               interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+                               linux,code = <KEY_POWER>;
+                       };
+
+                       resin {
+                               compatible = "qcom,pmk8350-resin";
+                               interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+                               linux,code = <KEY_VOLUMEDOWN>;
+                       };
+               };
+
+               pmk8350_vadc: adc@3100 {
+                       compatible = "qcom,spmi-adc7";
+                       reg = <0x3100>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "eoc-int-en-set";
+                       #io-channel-cells = <1>;
+                       io-channel-ranges;
+
+                       pmk8350_die_temp {
+                               reg = <PMK8350_ADC7_DIE_TEMP>;
+                               label = "pmk8350_die_temp";
+                               qcom,pre-scaling = <1 1>;
+                       };
+
+                       pm8350_die_temp {
+                               reg = <PM8350_ADC7_DIE_TEMP>;
+                               label = "pm8350_die_temp";
+                               qcom,pre-scaling = <1 1>;
+                       };
+
+                       pmr735a_die_temp {
+                               reg = <PMR735A_ADC7_DIE_TEMP>;
+                               label = "pmr735a_die_temp";
+                               qcom,pre-scaling = <1 1>;
+                       };
+
+                       pmr735b_die_temp {
+                               reg = <PMR735B_ADC7_DIE_TEMP>;
+                               label = "pmr735b_die_temp";
+                               qcom,pre-scaling = <1 1>;
+                       };
+               };
+
+               pmk8350_adc_tm: adc-tm@3400 {
+                       compatible = "qcom,adc-tm7";
+                       reg = <0x3400>;
+                       interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "threshold";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       #thermal-sensor-cells = <1>;
+                       status = "disabled";
+               };
+
+               pmk8350_gpios: gpios@b000 {
+                       compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
+                       reg = <0xb000>;
+                       gpio-controller;
+                       gpio-ranges = <&pmk8350_gpios 0 0 4>;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               pmk8350_rtc: rtc@6100 {
+                       compatible = "qcom,pmk8350-rtc";
+                       reg = <0x6100>, <0x6200>;
+                       reg-names = "rtc", "alarm";
+                       interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+               };
+       };
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Reply via email to