From: Robert Eckelmann <[email protected]> We know these devices are present, most of them are supported by downstream and close to the mainline kernels.
This is very handy when rebasing the integration tree with the support. No functional changes. Signed-off-by: Robert Eckelmann <[email protected]> --- .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 23 +++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 0fb1d7e724c4..0b219d0ff451 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -227,6 +227,10 @@ vreg_l26a_1p2: ldo26 { }; }; +&cci_i2c0 { + /* IMX363 @ 10 */ +}; + &cdsp_pas { status = "okay"; firmware-name = "qcom/sdm845/beryllium/cdsp.mbn"; @@ -261,6 +265,18 @@ &ibb { qcom,discharge-resistor-kohms = <300>; }; +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; + + status = "okay"; +}; + +&i2c5 { + /* TAS2559 @ 4C */ +}; + &lab { regulator-min-microvolt = <4600000>; regulator-max-microvolt = <6000000>; @@ -311,13 +327,6 @@ &mss_pil { firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn"; }; -&ipa { - qcom,gsi-loader = "self"; - memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; - status = "okay"; -}; - &pm8998_gpios { vol_up_pin_a: vol-up-active-state { pins = "gpio6"; -- 2.52.0
