On 26/11/2025 15:41, Dmitry Baryshkov wrote:
On Wed, Nov 26, 2025 at 09:08:35PM +0900, Robert Eckelmann via B4 Relay wrote:
From: Robert Eckelmann <[email protected]>
Enable the SLPI dsp on the Xiaomi Pocophone F1 with Qualcom SDM845 SoC.
Signed-off-by: Robert Eckelmann <[email protected]>
Signed-off-by: David Heidelberg <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 785006a15e97..0fb1d7e724c4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -425,6 +425,12 @@ &sdhc_2 {
cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
};
+&slpi_pas {
+ firmware-name = "qcom/sdm845/beryllium/slpi.mbn";
qcom/sdm845/Xiaomi/beryllium/slpi.mbn
Could be this change done for all the firmware files at once but later?
Currently all the firmwares using this legacy path.
David
[...]
