On Wed, Nov 26, 2025 at 09:08:35PM +0900, Robert Eckelmann via B4 Relay wrote:
> From: Robert Eckelmann <[email protected]>
>
> Enable the SLPI dsp on the Xiaomi Pocophone F1 with Qualcom SDM845 SoC.
>
> Signed-off-by: Robert Eckelmann <[email protected]>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
> b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
> index 785006a15e97..0fb1d7e724c4 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
> @@ -425,6 +425,12 @@ &sdhc_2 {
> cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
> };
>
> +&slpi_pas {
> + firmware-name = "qcom/sdm845/beryllium/slpi.mbn";
qcom/sdm845/Xiaomi/beryllium/slpi.mbn
> +
> + status = "okay";
> +};
> +
> &sound {
> compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
> pinctrl-0 = <&quat_mi2s_active
> @@ -637,3 +643,4 @@ &wifi {
> vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
> vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
> };
> +
>
> --
> 2.52.0
>
>
--
With best wishes
Dmitry
