Hook up the exynos5250-snow thermistors via the device tree now that there's a driver available to use them.
Signed-off-by: Doug Anderson <[email protected]> --- Changes in v2: - Match 'uV' -> 'uv' change in Naveen's bindings. arch/arm/boot/dts/cros5250-common.dtsi | 4 ++++ arch/arm/boot/dts/exynos5250-snow.dts | 31 +++++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index 46c0980..f7cc835 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -167,6 +167,10 @@ status = "disabled"; }; + adc@12D10000 { + vdd-supply = <&buck5_reg>; + }; + hdmi { hpd-gpio = <&gpx3 7 0xf 1 3>; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 17dd951..b78da7c 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -40,4 +40,35 @@ <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; }; }; + + adc@12D10000 { + ncp15wb473@3 { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 3>; + }; + ncp15wb473@4 { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 4>; + }; + ncp15wb473@5 { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 5>; + }; + ncp15wb473@6 { + compatible = "ntc,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <47000>; + pulldown-ohm = <0>; + io-channels = <&adc 6>; + }; + }; }; -- 1.8.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
