On 15 March 2013 15:54, Naveen Krishna Ch <naveenkrishna...@gmail.com> wrote:
> Doug,
>
> On 14 March 2013 02:10, Doug Anderson <diand...@chromium.org> wrote:
>> Hook up the exynos5250-snow thermistors via the device tree now that
>> there's a driver available to use them.
>>
>> Signed-off-by: Doug Anderson <diand...@chromium.org>
Tested-by: Naveen Krishna Chatradhi <ch.nav...@samsung.com>
used these changes to test on snow before submitting the ADC and NTC
driver changes.
>> ---
>> Changes in v2:
>> - Match 'uV' -> 'uv' change in Naveen's bindings.
>>
>> arch/arm/boot/dts/cros5250-common.dtsi | 4 ++++
>> arch/arm/boot/dts/exynos5250-snow.dts | 31 +++++++++++++++++++++++++++++++
>> 2 files changed, 35 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/cros5250-common.dtsi
>> b/arch/arm/boot/dts/cros5250-common.dtsi
>> index 46c0980..f7cc835 100644
>> --- a/arch/arm/boot/dts/cros5250-common.dtsi
>> +++ b/arch/arm/boot/dts/cros5250-common.dtsi
>> @@ -167,6 +167,10 @@
>> status = "disabled";
>> };
>>
>> + adc@12D10000 {
>> + vdd-supply = <&buck5_reg>;
>> + };
>> +
>> hdmi {
>> hpd-gpio = <&gpx3 7 0xf 1 3>;
>> };
>> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts
>> b/arch/arm/boot/dts/exynos5250-snow.dts
>> index 17dd951..b78da7c 100644
>> --- a/arch/arm/boot/dts/exynos5250-snow.dts
>> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
>> @@ -40,4 +40,35 @@
>> <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
>> };
>> };
>> +
>> + adc@12D10000 {
>> + ncp15wb473@3 {
>> + compatible = "ntc,ncp15wb473";
>> + pullup-uv = <1800000>;
>> + pullup-ohm = <47000>;
>> + pulldown-ohm = <0>;
>> + io-channels = <&adc 3>;
>> + };
>> + ncp15wb473@4 {
>> + compatible = "ntc,ncp15wb473";
>> + pullup-uv = <1800000>;
>> + pullup-ohm = <47000>;
>> + pulldown-ohm = <0>;
>> + io-channels = <&adc 4>;
>> + };
>> + ncp15wb473@5 {
>> + compatible = "ntc,ncp15wb473";
>> + pullup-uv = <1800000>;
>> + pullup-ohm = <47000>;
>> + pulldown-ohm = <0>;
>> + io-channels = <&adc 5>;
>> + };
>> + ncp15wb473@6 {
>> + compatible = "ntc,ncp15wb473";
>> + pullup-uv = <1800000>;
>> + pullup-ohm = <47000>;
>> + pulldown-ohm = <0>;
>> + io-channels = <&adc 6>;
>> + };
>> + };
>> };
> Thanks for the upload, i've tested with a similar changes.
>> --
>> 1.8.1.3
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>
>
>
> --
> Shine bright,
> (: Nav :)
--
Shine bright,
(: Nav :)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
