Today's linux-next merge of the arm-soc tree got a conflict in
arch/arm/boot/dts/omap3-evm.dts
caused by commits 975d963 (ARM: dts: omap: update usb_otg_hs data) and
465ce68 (ARM: dts: Add common support for omap3-evm).
I fixed it up (see below). Please verify that the resolution looks good.
Note that the resolution adds the phys and phy-names properties in the
usb_otg_hs node to complement the common omap3-evm DTSI introduced in
465ce68 with the changes done in 975d963.
Thanks,
Thierry
---
diff --cc arch/arm/boot/dts/omap3-evm-common.dtsi
index 0000000,b549329..3007e79
mode 000000,100644..100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@@ -1,0 -1,94 +1,96 @@@
+ /*
+ * Common support for omap3 EVM boards
+ */
+
+ #include "omap-gpmc-smsc911x.dtsi"
+
+ / {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ ledb {
+ label = "omap3evm::ledb";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ wl12xx_vmmc: wl12xx_vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 22 0>; /* gpio150 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ vin-supply = <&vmmc2>;
+ };
+ };
+
+ &i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+ };
+
+ #include "twl4030.dtsi"
+ #include "twl4030_omap3.dtsi"
+
+ &i2c2 {
+ clock-frequency = <400000>;
+ };
+
+ &i2c3 {
+ clock-frequency = <400000>;
+
+ /*
+ * TVP5146 Video decoder-in for analog input support.
+ */
+ tvp5146@5c {
+ compatible = "ti,tvp5146m2";
+ reg = <0x5c>;
+ };
+ };
+
+ &mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+ };
+
+ &mmc2 {
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+ };
+
+ &twl_gpio {
+ ti,use-leds;
+ };
+
+ &usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
++ phys = <&usb2_phy>;
++ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+ };
+
+ &gpmc {
+ ethernet@gpmc {
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 8>;
+ reg = <5 0 0xff>;
+ };
+ };
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
