* Thierry Reding <[email protected]> [131022 08:13]:
> Today's linux-next merge of the arm-soc tree got a conflict in
>
> arch/arm/boot/dts/omap3-evm.dts
>
> caused by commits 975d963 (ARM: dts: omap: update usb_otg_hs data) and
> 465ce68 (ARM: dts: Add common support for omap3-evm).
>
> I fixed it up (see below). Please verify that the resolution looks good.
> Note that the resolution adds the phys and phy-names properties in the
> usb_otg_hs node to complement the common omap3-evm DTSI introduced in
> 465ce68 with the changes done in 975d963.
Sigh there was no conflict in sight when I acked patch "ARM: dts: Add common
support for omap3-evm", then I created the omap3-evm-common.dtsi not
remembering about the earlier patch. So a totally self-inflicted merge
conflict again and more proof that the dts files need to be always
merged seprately from the drivers.
The merge conflict below looks correct thanks.
Regards,
Tony
> diff --cc arch/arm/boot/dts/omap3-evm-common.dtsi
> index 0000000,b549329..3007e79
> mode 000000,100644..100644
> --- a/arch/arm/boot/dts/omap3-evm-common.dtsi
> +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
> @@@ -1,0 -1,94 +1,96 @@@
> + /*
> + * Common support for omap3 EVM boards
> + */
> +
> + #include "omap-gpmc-smsc911x.dtsi"
> +
> + / {
> + cpus {
> + cpu@0 {
> + cpu0-supply = <&vcc>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + ledb {
> + label = "omap3evm::ledb";
> + gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
> + linux,default-trigger = "default-on";
> + };
> + };
> +
> + wl12xx_vmmc: wl12xx_vmmc {
> + compatible = "regulator-fixed";
> + regulator-name = "vwl1271";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + gpio = <&gpio5 22 0>; /* gpio150 */
> + startup-delay-us = <70000>;
> + enable-active-high;
> + vin-supply = <&vmmc2>;
> + };
> + };
> +
> + &i2c1 {
> + clock-frequency = <2600000>;
> +
> + twl: twl@48 {
> + reg = <0x48>;
> + interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> + interrupt-parent = <&intc>;
> + };
> + };
> +
> + #include "twl4030.dtsi"
> + #include "twl4030_omap3.dtsi"
> +
> + &i2c2 {
> + clock-frequency = <400000>;
> + };
> +
> + &i2c3 {
> + clock-frequency = <400000>;
> +
> + /*
> + * TVP5146 Video decoder-in for analog input support.
> + */
> + tvp5146@5c {
> + compatible = "ti,tvp5146m2";
> + reg = <0x5c>;
> + };
> + };
> +
> + &mmc1 {
> + vmmc-supply = <&vmmc1>;
> + vmmc_aux-supply = <&vsim>;
> + bus-width = <8>;
> + };
> +
> + &mmc2 {
> + vmmc-supply = <&wl12xx_vmmc>;
> + non-removable;
> + bus-width = <4>;
> + cap-power-off-card;
> + };
> +
> + &twl_gpio {
> + ti,use-leds;
> + };
> +
> + &usb_otg_hs {
> + interface-type = <0>;
> + usb-phy = <&usb2_phy>;
> ++ phys = <&usb2_phy>;
> ++ phy-names = "usb2-phy";
> + mode = <3>;
> + power = <50>;
> + };
> +
> + &gpmc {
> + ethernet@gpmc {
> + interrupt-parent = <&gpio6>;
> + interrupts = <16 8>;
> + reg = <5 0 0xff>;
> + };
> + };
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
