On Fri, 2005-02-25 at 14:30 +0100, Mws wrote: > hi, > > i also have problems with 2.6.11-rc5 and radeon: > > i am using a ATI Radeon X600 PciExpress. > > a) now the console framebuffer seems to bee working, thx benjamin :) > b) when bootup seq ist completed and i want to start X (xorg-x11) with > ati-drivers > x is freezing - not your problem, but the console is not correctly > restored :/ the only way > out is to reset the machine :/ > 2.6.11-rc3 was running fine in this case
Hrm, the binary drivers ? oh well... some users had them freezing vs. radeonfb before and not now. I don't know what they do and don't have access to a machine with them (there are no ppc versions) so it will be difficult to track. I suspect they completely reconfigure the chip and don't restore it properly tho. What exactly is happening. Does X launches at all ? When does it freeze ? On X launch or when exiting it ? Have you tried disabling dynamic clock tweaking ? (radeonfb.default_dynclk=-1 or 0 on the cmdline, first one means "don't touch the registers", secoond one means "disable dynamic clocks"). > i have attached my lspci -vv & lspci -tv output and following a small seq of > the dmesg output > when initializing the radeon fb. > > if i can provide/assit you with testing, i am available to do so, also if > you need more information > on my system. > > i am subscribed to lkml, but i would like to be included into cc seprately, > thx. > > > radeonfb_pci_register BEGIN > ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > radeonfb (0000:05:00.0): Found 131072k of DDR 128 bits wide videoram > radeonfb (0000:05:00.0): mapped 16384k videoram > radeonfb: Found Intel x86 BIOS ROM Image > radeonfb: Retreived PLL infos from BIOS > radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=400.00 Mhz, System=300.00 MHz > radeonfb: PLL min 20000 max 40000 > 1 chips in connector info > - chip 1 has 2 connectors > * connector 0 of type 2 (CRT) : 2300 > * connector 1 of type 3 (DVI-I) : 3221 > Starting monitor auto detection... > radeonfb: I2C (port 1) ... not found > radeonfb: I2C (port 2) ... not found > radeonfb: I2C (port 3) ... found CRT display > radeonfb: I2C (port 4) ... not found > radeonfb: I2C (port 2) ... not found > radeonfb: I2C (port 4) ... not found > radeonfb: I2C (port 3) ... found CRT display > radeonfb: Monitor 1 type CRT found > radeonfb: EDID probed > radeonfb: Monitor 2 type no found > Display is GTF capable > hStart = 1344, hEnd = 1504, hTotal = 1728 > vStart = 1025, vEnd = 1028, vTotal = 1072 > h_total_disp = 0x9f00d7 hsync_strt_wid = 0x14054a > v_total_disp = 0x3ff042f vsync_strt_wid = 0x30400 > pixclock = 6349 > freq = 15750 > freq = 15750, PLL min = 20000, PLL max = 40000 > ref_div = 12, ref_clk = 2700, output_freq = 31500 > ref_div = 12, ref_clk = 2700, output_freq = 31500 > post div = 0x1 > fb_div = 0x8c > ppll_div_3 = 0x1008c > Console: switching to colour frame buffer device 160x64 > radeonfb (0000:05:00.0): ATI Radeon [b > radeonfb_pci_register END > -- Benjamin Herrenschmidt <[EMAIL PROTECTED]> - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
