Use the more common pr_warn.
Other miscellanea:
o Coalesce formats
o Realign arguments
Signed-off-by: Joe Perches <j...@perches.com>
---
arch/arm/mach-davinci/board-da830-evm.c | 76 +++++++++++++-----------------
arch/arm/mach-davinci/board-dm644x-evm.c | 6 +--
arch/arm/mach-davinci/board-mityomapl138.c | 38 +++++++--------
arch/arm/mach-davinci/board-neuros-osd2.c | 3 +-
arch/arm/mach-davinci/time.c | 6 +--
5 files changed, 55 insertions(+), 74 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c
b/arch/arm/mach-davinci/board-da830-evm.c
index 5623131..c73cd88 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -145,8 +145,7 @@ static __init void da830_evm_usb_init(void)
/* USB_REFCLKIN is not used. */
ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
if (ret)
- pr_warning("%s: USB 2.0 PinMux setup failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret);
else {
/*
* TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
@@ -154,14 +153,14 @@ static __init void da830_evm_usb_init(void)
*/
ret = da8xx_register_usb20(1000, 3);
if (ret)
- pr_warning("%s: USB 2.0 registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 2.0 registration failed: %d\n",
+ __func__, ret);
}
ret = davinci_cfg_reg_list(da830_evm_usb11_pins);
if (ret) {
- pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 1.1 PinMux setup failed: %d\n",
+ __func__, ret);
return;
}
@@ -183,8 +182,8 @@ static __init void da830_evm_usb_init(void)
ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
if (ret)
- pr_warning("%s: USB 1.1 registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 1.1 registration failed: %d\n",
+ __func__, ret);
}
static const short da830_evm_mcasp1_pins[] = {
@@ -252,31 +251,30 @@ static inline void da830_evm_init_mmc(void)
ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins);
if (ret) {
- pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: mmc/sd mux setup failed: %d\n", ret);
return;
}
ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
if (ret) {
- pr_warning("da830_evm_init: can not open GPIO %d\n",
- DA830_MMCSD_WP_PIN);
+ pr_warn("da830_evm_init: can not open GPIO %d\n",
+ DA830_MMCSD_WP_PIN);
return;
}
gpio_direction_input(DA830_MMCSD_WP_PIN);
ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n");
if (ret) {
- pr_warning("da830_evm_init: can not open GPIO %d\n",
- DA830_MMCSD_CD_PIN);
+ pr_warn("da830_evm_init: can not open GPIO %d\n",
+ DA830_MMCSD_CD_PIN);
return;
}
gpio_direction_input(DA830_MMCSD_CD_PIN);
ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
if (ret) {
- pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: mmc/sd registration failed: %d\n",
+ ret);
gpio_free(DA830_MMCSD_WP_PIN);
}
}
@@ -404,20 +402,18 @@ static inline void da830_evm_init_nand(int mux_mode)
int ret;
if (HAS_MMC) {
- pr_warning("WARNING: both MMC/SD and NAND are "
- "enabled, but they share AEMIF pins.\n"
- "\tDisable MMC/SD for NAND support.\n");
+ pr_warn("WARNING: both MMC/SD and NAND are enabled, but they
share AEMIF pins.\n"
+ "\tDisable MMC/SD for NAND support.\n");
return;
}
ret = davinci_cfg_reg_list(da830_evm_emif25_pins);
if (ret)
- pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: emif25 mux setup failed: %d\n", ret);
ret = platform_device_register(&da830_evm_nand_device);
if (ret)
- pr_warning("da830_evm_init: NAND device not registered.\n");
+ pr_warn("da830_evm_init: NAND device not registered.\n");
if (davinci_aemif_setup(&da830_evm_nand_device))
pr_warn("%s: Cannot configure AEMIF.\n", __func__);
@@ -435,12 +431,11 @@ static inline void da830_evm_init_lcdc(int mux_mode)
ret = davinci_cfg_reg_list(da830_lcdcntl_pins);
if (ret)
- pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: lcdcntl mux setup failed: %d\n", ret);
ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
if (ret)
- pr_warning("da830_evm_init: lcd setup failed: %d\n", ret);
+ pr_warn("da830_evm_init: lcd setup failed: %d\n", ret);
gpio_direction_output(mux_mode, 0);
}
@@ -602,18 +597,15 @@ static __init void da830_evm_init(void)
ret = da830_register_edma(da830_edma_rsv);
if (ret)
- pr_warning("da830_evm_init: edma registration failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: edma registration failed: %d\n", ret);
ret = davinci_cfg_reg_list(da830_i2c0_pins);
if (ret)
- pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: i2c0 mux setup failed: %d\n", ret);
ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
if (ret)
- pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: i2c0 registration failed: %d\n", ret);
da830_evm_usb_init();
@@ -622,18 +614,16 @@ static __init void da830_evm_init(void)
ret = davinci_cfg_reg_list(da830_cpgmac_pins);
if (ret)
- pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: cpgmac mux setup failed: %d\n", ret);
ret = da8xx_register_emac();
if (ret)
- pr_warning("da830_evm_init: emac registration failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: emac registration failed: %d\n", ret);
ret = da8xx_register_watchdog();
if (ret)
- pr_warning("da830_evm_init: watchdog registration failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: watchdog registration failed: %d\n",
+ ret);
davinci_serial_init(da8xx_serial_device);
i2c_register_board_info(1, da830_evm_i2c_devices,
@@ -641,8 +631,7 @@ static __init void da830_evm_init(void)
ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins);
if (ret)
- pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: mcasp1 mux setup failed: %d\n", ret);
da8xx_register_mcasp(1, &da830_evm_snd_data);
@@ -650,18 +639,17 @@ static __init void da830_evm_init(void)
ret = da8xx_register_rtc();
if (ret)
- pr_warning("da830_evm_init: rtc setup failed: %d\n", ret);
+ pr_warn("da830_evm_init: rtc setup failed: %d\n", ret);
ret = spi_register_board_info(da830evm_spi_info,
ARRAY_SIZE(da830evm_spi_info));
if (ret)
- pr_warn("%s: spi info registration failed: %d\n", __func__,
- ret);
+ pr_warn("%s: spi info registration failed: %d\n",
+ __func__, ret);
ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info));
if (ret)
- pr_warning("da830_evm_init: spi 0 registration failed: %d\n",
- ret);
+ pr_warn("da830_evm_init: spi 0 registration failed: %d\n", ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c
b/arch/arm/mach-davinci/board-dm644x-evm.c
index e583e58..139848b 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -767,8 +767,7 @@ static __init void davinci_evm_init(void)
if (HAS_ATA) {
if (HAS_NAND || HAS_NOR)
- pr_warning("WARNING: both IDE and Flash are "
- "enabled, but they share AEMIF pins.\n"
+ pr_warn("WARNING: both IDE and Flash are enabled, but
they share AEMIF pins.\n"
"\tDisable IDE for NAND/NOR support.\n");
davinci_init_ide();
} else if (HAS_NAND || HAS_NOR) {
@@ -785,8 +784,7 @@ static __init void davinci_evm_init(void)
evm_leds[7].default_trigger = "nand-disk";
if (HAS_NOR)
- pr_warning("WARNING: both NAND and NOR flash "
- "are enabled; disable one of them.\n");
+ pr_warn("WARNING: both NAND and NOR flash are
enabled; disable one of them.\n");
} else if (HAS_NOR)
platform_device_register(&davinci_evm_norflash_device);
}
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c
b/arch/arm/mach-davinci/board-mityomapl138.c
index 96fc00a..64fa927 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -107,7 +107,7 @@ static void mityomapl138_cpufreq_init(const char *partnum)
ret = da850_register_cpufreq("pll0_sysclk3");
if (ret)
- pr_warning("cpufreq registration failed: %d\n", ret);
+ pr_warn("cpufreq registration failed: %d\n", ret);
}
#else
static void mityomapl138_cpufreq_init(const char *partnum) { }
@@ -121,20 +121,19 @@ static void read_factory_config(struct memory_accessor
*a, void *context)
ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
if (ret != sizeof(struct factory_config)) {
- pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n",
- ret);
+ pr_warn("MityOMAPL138: Read Factory Config Failed: %d\n", ret);
goto bad_config;
}
if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
- pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n",
- factory_config.magic);
+ pr_warn("MityOMAPL138: Factory Config Magic Wrong (%X)\n",
+ factory_config.magic);
goto bad_config;
}
if (factory_config.version != FACTORY_CONFIG_VERSION) {
- pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n",
- factory_config.version);
+ pr_warn("MityOMAPL138: Factory Config Version Wrong (%X)\n",
+ factory_config.version);
goto bad_config;
}
@@ -143,8 +142,7 @@ static void read_factory_config(struct memory_accessor *a,
void *context)
memcpy(soc_info->emac_pdata->mac_addr,
factory_config.mac, ETH_ALEN);
else
- pr_warning("MityOMAPL138: Invalid MAC found "
- "in factory config block\n");
+ pr_warn("MityOMAPL138: Invalid MAC found in factory config
block\n");
partnum = factory_config.partnum;
pr_info("MityOMAPL138: Part Number = %s\n", partnum);
@@ -478,7 +476,7 @@ static void __init mityomapl138_config_emac(void)
}
if (ret) {
- pr_warning("mii/rmii mux setup failed: %d\n", ret);
+ pr_warn("mii/rmii mux setup failed: %d\n", ret);
return;
}
@@ -489,7 +487,7 @@ static void __init mityomapl138_config_emac(void)
ret = da8xx_register_emac();
if (ret)
- pr_warning("emac registration failed: %d\n", ret);
+ pr_warn("emac registration failed: %d\n", ret);
}
static struct davinci_pm_config da850_pm_pdata = {
@@ -511,21 +509,21 @@ static void __init mityomapl138_init(void)
/* for now, no special EDMA channels are reserved */
ret = da850_register_edma(NULL);
if (ret)
- pr_warning("edma registration failed: %d\n", ret);
+ pr_warn("edma registration failed: %d\n", ret);
ret = da8xx_register_watchdog();
if (ret)
- pr_warning("watchdog registration failed: %d\n", ret);
+ pr_warn("watchdog registration failed: %d\n", ret);
davinci_serial_init(da8xx_serial_device);
ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
if (ret)
- pr_warning("i2c0 registration failed: %d\n", ret);
+ pr_warn("i2c0 registration failed: %d\n", ret);
ret = pmic_tps65023_init();
if (ret)
- pr_warning("TPS65023 PMIC init failed: %d\n", ret);
+ pr_warn("TPS65023 PMIC init failed: %d\n", ret);
mityomapl138_setup_nand();
@@ -537,22 +535,22 @@ static void __init mityomapl138_init(void)
ret = da8xx_register_spi_bus(1,
ARRAY_SIZE(mityomapl138_spi_flash_info));
if (ret)
- pr_warning("spi 1 registration failed: %d\n", ret);
+ pr_warn("spi 1 registration failed: %d\n", ret);
mityomapl138_config_emac();
ret = da8xx_register_rtc();
if (ret)
- pr_warning("rtc setup failed: %d\n", ret);
+ pr_warn("rtc setup failed: %d\n", ret);
ret = da8xx_register_cpuidle();
if (ret)
- pr_warning("cpuidle registration failed: %d\n", ret);
+ pr_warn("cpuidle registration failed: %d\n", ret);
ret = da850_register_pm(&da850_pm_device);
if (ret)
- pr_warning("da850_evm_init: suspend registration failed: %d\n",
- ret);
+ pr_warn("da850_evm_init: suspend registration failed: %d\n",
+ ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c
b/arch/arm/mach-davinci/board-neuros-osd2.c
index bb680af..6a51c79 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -183,8 +183,7 @@ static __init void davinci_ntosd2_init(void)
if (HAS_ATA) {
if (HAS_NAND)
- pr_warning("WARNING: both IDE and Flash are "
- "enabled, but they share AEMIF pins.\n"
+ pr_warn("WARNING: both IDE and Flash are enabled, but
they share AEMIF pins.\n"
"\tDisable IDE for NAND/NOR support.\n");
davinci_init_ide();
} else if (HAS_NAND) {
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 24ad30f..709ff8f 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -364,12 +364,10 @@ void __init davinci_timer_init(void)
/* Only bottom timers can use compare regs */
if (IS_TIMER_TOP(clockevent_id))
- pr_warning("davinci_timer_init: Invalid use"
- " of system timers. Results unpredictable.\n");
+ pr_warn("davinci_timer_init: Invalid use of system
timers. Results unpredictable.\n");
else if ((dtip[event_timer].cmp_off == 0)
|| (dtip[event_timer].cmp_irq == 0))
- pr_warning("davinci_timer_init: Invalid timer instance"
- " setup. Results unpredictable.\n");
+ pr_warn("davinci_timer_init: Invalid timer instance
setup. Results unpredictable.\n");
else {
timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
--
1.8.1.2.459.gbcd45b4.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
