Use the more common pr_warn.
Other miscellanea:
o Realign arguments
Signed-off-by: Joe Perches <j...@perches.com>
---
arch/arm/mach-orion5x/dns323-setup.c | 8 ++++----
arch/arm/mach-orion5x/terastation_pro2-setup.c | 2 +-
arch/arm/mach-orion5x/ts209-setup.c | 2 +-
arch/arm/mach-orion5x/ts409-setup.c | 2 +-
arch/arm/mach-orion5x/ts78xx-setup.c | 4 ++--
5 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-orion5x/dns323-setup.c
b/arch/arm/mach-orion5x/dns323-setup.c
index 56edeab..09d2a26 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -550,7 +550,7 @@ static int __init dns323_identify_rev(void)
break;
}
if (i >= 1000) {
- pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n");
+ pr_warn("DNS-323: Timeout accessing PHY, assuming rev B1\n");
return DNS323_REV_B1;
}
writel((3 << 21) /* phy ID reg */ |
@@ -562,7 +562,7 @@ static int __init dns323_identify_rev(void)
break;
}
if (i >= 1000) {
- pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n");
+ pr_warn("DNS-323: Timeout reading PHY, assuming rev B1\n");
return DNS323_REV_B1;
}
pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff);
@@ -577,8 +577,8 @@ static int __init dns323_identify_rev(void)
case 0x0e10: /* MV88E1118 */
return DNS323_REV_C1;
default:
- pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
- reg & 0xffff);
+ pr_warn("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
+ reg & 0xffff);
}
return DNS323_REV_B1;
}
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c
b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 6208d12..1208674 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -349,7 +349,7 @@ static void __init tsp2_init(void)
gpio_free(TSP2_RTC_GPIO);
}
if (tsp2_i2c_rtc.irq == 0)
- pr_warning("tsp2_init: failed to get RTC IRQ\n");
+ pr_warn("tsp2_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
/* register Terastation Pro II specific power-off method */
diff --git a/arch/arm/mach-orion5x/ts209-setup.c
b/arch/arm/mach-orion5x/ts209-setup.c
index 9136797..c725b7c 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -314,7 +314,7 @@ static void __init qnap_ts209_init(void)
gpio_free(TS209_RTC_GPIO);
}
if (qnap_ts209_i2c_rtc.irq == 0)
- pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
+ pr_warn("qnap_ts209_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
/* register tsx09 specific power-off method */
diff --git a/arch/arm/mach-orion5x/ts409-setup.c
b/arch/arm/mach-orion5x/ts409-setup.c
index 5c079d31..cf2ab53 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -302,7 +302,7 @@ static void __init qnap_ts409_init(void)
gpio_free(TS409_RTC_GPIO);
}
if (qnap_ts409_i2c_rtc.irq == 0)
- pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
+ pr_warn("qnap_ts409_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
platform_device_register(&ts409_leds);
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c
b/arch/arm/mach-orion5x/ts78xx-setup.c
index db16dae..1b704d3 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -403,8 +403,8 @@ static void ts78xx_fpga_supports(void)
/* enable devices if magic matches */
switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
case TS7800_FPGA_MAGIC:
- pr_warning("unrecognised FPGA revision 0x%.2x\n",
- ts78xx_fpga.id & 0xff);
+ pr_warn("unrecognised FPGA revision 0x%.2x\n",
+ ts78xx_fpga.id & 0xff);
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
ts78xx_fpga.supports.ts_rng.present = 1;
--
1.8.1.2.459.gbcd45b4.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
