Berlin BG2 also has a SATA PHY compatible with the current driver
except different PHY_BASE. Add a new compatible to the driver
reflecting the different PHY_BASE.
Acked-by: Antoine Ténart <antoine.ten...@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
---
Cc: Kishon Vijay Abraham I <kis...@ti.com>
Cc: "Antoine Ténart" <antoine.ten...@free-electrons.com>
Cc: devicet...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/phy/phy-berlin-sata.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c
index 9682b0f66177..71568f5444ac 100644
--- a/drivers/phy/phy-berlin-sata.c
+++ b/drivers/phy/phy-berlin-sata.c
@@ -30,6 +30,7 @@
#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16)
#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19)
+#define BG2_PHY_BASE 0x080
#define BG2Q_PHY_BASE 0x200
/* register 0x01 */
@@ -186,10 +187,15 @@ static u32 phy_berlin_power_down_bits[] = {
POWER_DOWN_PHY1,
};
+static u32 bg2_sata_phy_base = BG2_PHY_BASE;
static u32 bg2q_sata_phy_base = BG2Q_PHY_BASE;
static const struct of_device_id phy_berlin_sata_of_match[] = {
{
+ .compatible = "marvell,berlin2-sata-phy",
+ .data = &bg2_sata_phy_base,
+ },
+ {
.compatible = "marvell,berlin2q-sata-phy",
.data = &bg2q_sata_phy_base,
},
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
