Marvell Berlin BG2 based Sony NSZ-GS7 has an unpopulated SATA plug
on its PCB solder side. As it is quite easy to populate and I have
done it, enable AHCI and SATA by default.
Acked-by: Antoine Ténart <antoine.ten...@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
---
Cc: Kishon Vijay Abraham I <kis...@ti.com>
Cc: "Antoine Ténart" <antoine.ten...@free-electrons.com>
Cc: devicet...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index c72bfd468d10..0a13e8a5da15 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -26,4 +26,11 @@
};
};
+&ahci { status = "okay"; };
+
+/* Unpopulated SATA plug on solder side */
+&sata0 { status = "okay"; };
+
+&sata_phy { status = "okay"; };
+
&uart0 { status = "okay"; };
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
