Add DT nodes for the AHCI controller and SATA PHY found on Marvell
Berlin2 SoCs.
Acked-by: Antoine Ténart <antoine.ten...@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
---
Changelog:
v1->v2:
- remove status = "disabled" from SATA controller node (Suggested by
Antoine)
Cc: Kishon Vijay Abraham I <kis...@ti.com>
Cc: "Antoine Ténart" <antoine.ten...@free-electrons.com>
Cc: devicet...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm/boot/dts/berlin2.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 9d7c810ebd0b..f39090491eb2 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -246,6 +246,45 @@
};
};
+ ahci: sata@e90000 {
+ compatible = "marvell,berlin2-ahci", "generic-ahci";
+ reg = <0xe90000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy 0>;
+ status = "disabled";
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy 1>;
+ status = "disabled";
+ };
+ };
+
+ sata_phy: phy@e900a0 {
+ compatible = "marvell,berlin2-sata-phy";
+ reg = <0xe900a0 0x200>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <1>;
+ status = "disabled";
+
+ sata-phy@0 {
+ reg = <0>;
+ };
+
+ sata-phy@1 {
+ reg = <1>;
+ };
+ };
+
chip: chip-control@ea0000 {
compatible = "marvell,berlin2-chip-ctrl";
#clock-cells = <1>;
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
