Add runtime_suspend_scanrate_ms power management interfaces in device's power group, so users or applications can control the runtime power management strategy of trackpad device as their requirements. TEST=test on Chromebooks.
Signed-off-by: Dudley Du <dudley.duli...@gmail.com> --- drivers/input/mouse/cyapa.c | 171 +++++++++++++++++++++++++++++++++++++++++++- drivers/input/mouse/cyapa.h | 4 ++ 2 files changed, 174 insertions(+), 1 deletion(-) diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c index 73f6817..3bcfce3 100644 --- a/drivers/input/mouse/cyapa.c +++ b/drivers/input/mouse/cyapa.c @@ -23,6 +23,7 @@ #include <linux/mutex.h> #include <linux/slab.h> #include <linux/uaccess.h> +#include <linux/pm_runtime.h> #include "cyapa.h" @@ -327,6 +328,8 @@ static int cyapa_open(struct input_dev *input) } enable_irq(client->irq); + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); out: mutex_unlock(&cyapa->state_sync_lock); return error; @@ -340,8 +343,10 @@ static void cyapa_close(struct input_dev *input) mutex_lock(&cyapa->state_sync_lock); disable_irq(client->irq); + pm_runtime_disable(&client->dev); if (!CYAPA_BOOTLOADER(cyapa) && cyapa->ops->set_power_mode) cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0); + pm_runtime_set_suspended(&client->dev); mutex_unlock(&cyapa->state_sync_lock); } @@ -542,6 +547,7 @@ static irqreturn_t cyapa_irq(int irq, void *dev_id) struct device *dev = &cyapa->client->dev; bool cont; + pm_runtime_get_sync(dev); if (device_may_wakeup(dev)) pm_wakeup_event(dev, 0); @@ -572,6 +578,8 @@ static irqreturn_t cyapa_irq(int irq, void *dev_id) } out: + pm_runtime_mark_last_busy(dev); + pm_runtime_put_sync_autosuspend(dev); return IRQ_HANDLED; } @@ -665,6 +673,116 @@ static void cyapa_remove_power_wakeup_group(void *data) } #endif /* CONFIG_PM_SLEEP */ +#ifdef CONFIG_PM_RUNTIME +static ssize_t cyapa_show_rt_suspend_scanrate(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct cyapa *cyapa = dev_get_drvdata(dev); + u8 pwr_cmd; + u16 sleep_time; + int error; + + error = mutex_lock_interruptible(&cyapa->state_sync_lock); + if (error) + return error; + pwr_cmd = cyapa->runtime_suspend_power_mode; + sleep_time = cyapa->runtime_suspend_sleep_time; + mutex_unlock(&cyapa->state_sync_lock); + + if (cyapa->gen == CYAPA_GEN3) + return scnprintf(buf, PAGE_SIZE, "%u\n", + cyapa_pwr_cmd_to_sleep_time(pwr_cmd)); + return scnprintf(buf, PAGE_SIZE, "%u\n", sleep_time); +} + +static ssize_t cyapa_update_rt_suspend_scanrate(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct cyapa *cyapa = dev_get_drvdata(dev); + u16 time; + int error; + + if (buf == NULL || count == 0 || kstrtou16(buf, 10, &time)) { + dev_err(dev, "invalid runtime suspend scanrate ms parameter\n"); + return -EINVAL; + } + + /* + * When the suspend scanrate is changed, pm_runtime_get to resume + * a potentially suspended device, update to the new pwr_cmd + * and then pm_runtime_put to suspend into the new power mode. + */ + pm_runtime_get_sync(dev); + error = mutex_lock_interruptible(&cyapa->state_sync_lock); + if (error) + return error; + cyapa->runtime_suspend_sleep_time = max_t(u16, time, 1000); + cyapa->runtime_suspend_power_mode = + cyapa_sleep_time_to_pwr_cmd(cyapa->runtime_suspend_sleep_time); + mutex_unlock(&cyapa->state_sync_lock); + pm_runtime_put_sync_autosuspend(dev); + + return count; +} + +static DEVICE_ATTR(runtime_suspend_scanrate_ms, S_IRUGO|S_IWUSR, + cyapa_show_rt_suspend_scanrate, + cyapa_update_rt_suspend_scanrate); + +static struct attribute *cyapa_power_runtime_entries[] = { + &dev_attr_runtime_suspend_scanrate_ms.attr, + NULL, +}; + +static const struct attribute_group cyapa_power_runtime_group = { + .name = power_group_name, + .attrs = cyapa_power_runtime_entries, +}; + +static void cyapa_remove_power_runtime_group(void *data) +{ + struct cyapa *cyapa = data; + + sysfs_unmerge_group(&cyapa->client->dev.kobj, + &cyapa_power_runtime_group); +} + +static int cyapa_start_runtime(struct cyapa *cyapa) +{ + struct device *dev = &cyapa->client->dev; + int error; + + cyapa->runtime_suspend_power_mode = PWR_MODE_IDLE; + cyapa->runtime_suspend_sleep_time = + cyapa_pwr_cmd_to_sleep_time(cyapa->runtime_suspend_power_mode); + + error = sysfs_merge_group(&dev->kobj, &cyapa_power_runtime_group); + if (error) { + dev_err(dev, + "failed to create power runtime group: %d\n", error); + return error; + } + + error = devm_add_action(dev, cyapa_remove_power_runtime_group, cyapa); + if (error) { + cyapa_remove_power_runtime_group(cyapa); + dev_err(dev, + "failed to add power runtime cleanup action: %d\n", + error); + return error; + } + + /* runtime is enabled until device is operational and opened. */ + pm_runtime_set_suspended(dev); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_autosuspend_delay(dev, AUTOSUSPEND_DELAY); + + return 0; +} +#endif /* CONFIG_PM_RUNTIME */ + static int cyapa_probe(struct i2c_client *client, const struct i2c_device_id *dev_id) { @@ -725,6 +843,14 @@ static int cyapa_probe(struct i2c_client *client, } #endif /* CONFIG_PM_SLEEP */ +#ifdef CONFIG_PM_RUNTIME + error = cyapa_start_runtime(cyapa); + if (error) { + dev_err(dev, "failed to start pm_runtime: %d\n", error); + return error; + } +#endif /* CONFIG_PM_RUNTIME */ + error = devm_request_threaded_irq(dev, client->irq, NULL, cyapa_irq, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, @@ -765,6 +891,7 @@ static int __maybe_unused cyapa_suspend(struct device *dev) if (error) return error; + pm_runtime_disable(dev); disable_irq(client->irq); /* @@ -781,6 +908,8 @@ static int __maybe_unused cyapa_suspend(struct device *dev) error); } + pm_runtime_set_suspended(dev); + if (device_may_wakeup(dev)) cyapa->irq_wake = (enable_irq_wake(client->irq) == 0); @@ -801,17 +930,57 @@ static int __maybe_unused cyapa_resume(struct device *dev) cyapa->irq_wake = false; } + pm_runtime_set_active(dev); + error = cyapa_reinitialize(cyapa); if (error) dev_warn(dev, "failed to reinitialize TP device: %d\n", error); enable_irq(client->irq); + pm_runtime_enable(dev); + mutex_unlock(&cyapa->state_sync_lock); return 0; } -static SIMPLE_DEV_PM_OPS(cyapa_pm_ops, cyapa_suspend, cyapa_resume); +#ifdef CONFIG_PM_RUNTIME +static int cyapa_runtime_suspend(struct device *dev) +{ + struct cyapa *cyapa = dev_get_drvdata(dev); + int error; + + if (!CYAPA_BOOTLOADER(cyapa) && cyapa->ops->set_power_mode) { + error = cyapa->ops->set_power_mode(cyapa, + cyapa->runtime_suspend_power_mode, + cyapa->runtime_suspend_sleep_time); + if (error) + dev_warn(dev, "runtime suspend failed: %d\n", error); + } + + return 0; +} + +static int cyapa_runtime_resume(struct device *dev) +{ + struct cyapa *cyapa = dev_get_drvdata(dev); + int error; + + if (!CYAPA_BOOTLOADER(cyapa) && cyapa->ops->set_power_mode) { + error = cyapa->ops->set_power_mode(cyapa, + PWR_MODE_FULL_ACTIVE, 0); + if (error) + dev_warn(dev, "runtime resume failed: %d\n", error); + } + + return 0; +} +#endif /* CONFIG_PM_RUNTIME */ + +static const struct dev_pm_ops cyapa_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(cyapa_suspend, cyapa_resume) + SET_RUNTIME_PM_OPS(cyapa_runtime_suspend, cyapa_runtime_resume, NULL) +}; static const struct i2c_device_id cyapa_id_table[] = { { "cyapa", 0 }, diff --git a/drivers/input/mouse/cyapa.h b/drivers/input/mouse/cyapa.h index d7d4f11..bf0bbd9 100644 --- a/drivers/input/mouse/cyapa.h +++ b/drivers/input/mouse/cyapa.h @@ -262,6 +262,10 @@ struct cyapa { /* power mode settings */ u8 suspend_power_mode; u16 suspend_sleep_time; +#ifdef CONFIG_PM_RUNTIME + u8 runtime_suspend_power_mode; + u16 runtime_suspend_sleep_time; +#endif /* CONFIG_PM_RUNTIME */ u8 dev_pwr_mode; u16 dev_sleep_time; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/