Dudley,
On Mon, Dec 15, 2014 at 02:23:20PM +0800, Dudley Du wrote:
> Add firmware image update function supported for gen5 trackpad device,
> it can be used through sysfs update_fw interface.
> TEST=test on Chromebooks.
>
> Signed-off-by: Dudley Du <dudley.duli...@gmail.com>
> ---
> drivers/input/mouse/Kconfig | 1 +
> drivers/input/mouse/cyapa_gen5.c | 292
> ++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 292 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
> index d8b46b0..728490e 100644
> --- a/drivers/input/mouse/Kconfig
> +++ b/drivers/input/mouse/Kconfig
> @@ -206,6 +206,7 @@ config MOUSE_BCM5974
> config MOUSE_CYAPA
> tristate "Cypress APA I2C Trackpad support"
> depends on I2C
> + select CRC_ITU_T
> help
> This driver adds support for Cypress All Points Addressable (APA)
> I2C Trackpads, including the ones used in 2012 Samsung Chromebooks.
> diff --git a/drivers/input/mouse/cyapa_gen5.c
> b/drivers/input/mouse/cyapa_gen5.c
> index 1ac264d..e89a952 100644
> --- a/drivers/input/mouse/cyapa_gen5.c
> +++ b/drivers/input/mouse/cyapa_gen5.c
> @@ -18,6 +18,7 @@
> #include <linux/completion.h>
> #include <linux/slab.h>
> #include <linux/unaligned/access_ok.h>
> +#include <linux/crc-itu-t.h>
> #include "cyapa.h"
>
>
> @@ -911,7 +912,87 @@ static int cyapa_gen5_state_parse(struct cyapa *cyapa,
> u8 *reg_data, int len)
> return -EAGAIN;
> }
>
> -bool cyapa_gen5_sort_bl_exit_data(struct cyapa *cyapa, u8 *buf, int len)
> +static int cyapa_gen5_bl_initiate(struct cyapa *cyapa,
> + const struct firmware *fw)
> +{
> + u16 length = 0;
> + u16 data_len = 0;
> + u16 meta_data_crc = 0;
> + u16 cmd_crc = 0;
> + u8 bl_gen5_activate[18 + CYAPA_TSG_FLASH_MAP_BLOCK_SIZE + 3];
> + int bl_gen5_activate_size = 0;
> + u8 resp_data[11];
> + int resp_len;
> + struct cyapa_tsg_bin_image *image;
> + int records_num;
> + u8 *data;
> + int error;
> +
> + /* Try to dump all buffered report data before send any command. */
any send command.
> + cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
> +
> + bl_gen5_activate_size = sizeof(bl_gen5_activate);
> + memset(bl_gen5_activate, 0, bl_gen5_activate_size);
> +
> + /* Output Report Register Address[15:0] = 0004h */
> + bl_gen5_activate[0] = 0x04;
> + bl_gen5_activate[1] = 0x00;
> +
> + /* Total command length[15:0] */
> + length = bl_gen5_activate_size - 2;
> + put_unaligned_le16(length, &bl_gen5_activate[2]);
> + bl_gen5_activate[4] = 0x40; /* Report ID = 40h */
> + bl_gen5_activate[5] = 0x00; /* RSVD = 00h */
> +
> + bl_gen5_activate[6] = GEN5_SOP_KEY; /* SOP = 01h */
> + bl_gen5_activate[7] = 0x48; /* Command Code = 48h */
> +
> + /* 8 Key bytes and block size */
> + data_len = CYAPA_TSG_BL_KEY_SIZE + CYAPA_TSG_FLASH_MAP_BLOCK_SIZE;
> + /* Data Length[15:0] */
> + put_unaligned_le16(data_len, &bl_gen5_activate[8]);
> + bl_gen5_activate[10] = 0xa5; /* Key Byte 0 */
> + bl_gen5_activate[11] = 0x01;
> + bl_gen5_activate[12] = 0x02; /* . */
> + bl_gen5_activate[13] = 0x03; /* . */
> + bl_gen5_activate[14] = 0xff; /* . */
> + bl_gen5_activate[15] = 0xfe;
> + bl_gen5_activate[16] = 0xfd;
> + bl_gen5_activate[17] = 0x5a; /* Key Byte 7 */
> +
I like the descriptions of what these magic values are.
I just wish there was a cleaner way to build up these buffers.
> + /* Copy 60 bytes Meta Data Row Parameters */
> + image = (struct cyapa_tsg_bin_image *)fw->data;
> + records_num = (fw->size - sizeof(struct cyapa_tsg_bin_image_head)) /
> + sizeof(struct cyapa_tsg_bin_image_data_record);
> + /* APP_INTEGRITY row is always the last row block */
> + data = image->records[records_num - 1].record_data;
> + memcpy(&bl_gen5_activate[18], data, CYAPA_TSG_FLASH_MAP_METADATA_SIZE);
> +
> + meta_data_crc = crc_itu_t(0xffff, &bl_gen5_activate[18],
> + CYAPA_TSG_FLASH_MAP_METADATA_SIZE);
> + /* Meta Data CRC[15:0] */
> + put_unaligned_le16(meta_data_crc,
> + &bl_gen5_activate[18 + CYAPA_TSG_FLASH_MAP_METADATA_SIZE]);
> +
> + cmd_crc = crc_itu_t(0xffff, &bl_gen5_activate[6], 4 + data_len);
> + put_unaligned_le16(cmd_crc,
> + &bl_gen5_activate[bl_gen5_activate_size - 3]); /* CRC[15:0] */
> + bl_gen5_activate[bl_gen5_activate_size - 1] = GEN5_EOP_KEY;
> +
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
> + bl_gen5_activate, sizeof(bl_gen5_activate),
> + resp_data, &resp_len, 12000,
> + cyapa_gen5_sort_tsg_pip_bl_resp_data, true);
> + if (error || resp_len != GEN5_BL_INITIATE_RESP_LEN ||
> + resp_data[2] != GEN5_BL_RESP_REPORT_ID ||
> + !GEN5_CMD_COMPLETE_SUCCESS(resp_data[5]))
> + return error ? error : -EAGAIN;
> +
> + return 0;
> +}
> +
> +static bool cyapa_gen5_sort_bl_exit_data(struct cyapa *cyapa, u8 *buf, int
> len)
> {
> if (buf == NULL || len < GEN5_RESP_LENGTH_SIZE)
> return false;
> @@ -960,6 +1041,210 @@ static int cyapa_gen5_bl_exit(struct cyapa *cyapa)
> return -ENODEV;
> }
>
> +static int cyapa_gen5_bl_enter(struct cyapa *cyapa)
> +{
> + int error;
> + u8 cmd[] = { 0x04, 0x00, 0x05, 0x00, 0x2F, 0x00, 0x01 };
> + u8 resp_data[2];
> + int resp_len;
> +
> + error = cyapa_poll_state(cyapa, 500);
> + if (error < 0)
> + return error;
> + if (cyapa->gen != CYAPA_GEN5)
> + return -EINVAL;
> +
> + /* Already in Gen5 BL. Skipping exit. */
> + if (cyapa->state == CYAPA_STATE_GEN5_BL)
> + return 0;
> +
> + if (cyapa->state != CYAPA_STATE_GEN5_APP)
> + return -EAGAIN;
> +
> + /* Try to dump all buffered report data before send any command. */
> + cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
> +
> + /*
> + * Send bootloader enter command to trackpad device,
> + * after enter bootloader, the response data is two bytes of 0x00 0x00.
> + */
> + resp_len = sizeof(resp_data);
> + memset(resp_data, 0, resp_len);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
> + cmd, sizeof(cmd),
> + resp_data, &resp_len,
> + 5000, cyapa_gen5_sort_application_launch_data,
> + true);
> + if (error || resp_data[0] != 0x00 || resp_data[1] != 0x00)
> + return error < 0 ? error : -EAGAIN;
> +
> + cyapa->state = CYAPA_STATE_GEN5_BL;
> + return 0;
> +}
> +
> +static int cyapa_gen5_check_fw(struct cyapa *cyapa, const struct firmware
> *fw)
> +{
> + int i;
> + struct cyapa_tsg_bin_image *image;
> + int flash_records_count;
> + u16 expected_app_crc;
> + u16 expected_app_integrity_crc;
> + u16 app_crc = 0;
> + u16 app_integrity_crc = 0;
> + u16 row_num;
> + u8 *data;
> + u32 app_start;
> + u16 app_len;
> + u32 img_start;
> + u16 img_len;
> + int record_index;
> + struct device *dev = &cyapa->client->dev;
> +
> + image = (struct cyapa_tsg_bin_image *)fw->data;
> + flash_records_count = (fw->size -
> + sizeof(struct cyapa_tsg_bin_image_head)) /
> + sizeof(struct cyapa_tsg_bin_image_data_record);
> +
> + /* APP_INTEGRITY row is always the last row block,
> + * and the row id must be 0x01ff */
> + row_num = get_unaligned_be16(
> + &image->records[flash_records_count - 1].row_number);
> + if (image->records[flash_records_count - 1].flash_array_id != 0x00 &&
> + row_num != 0x01ff) {
> + dev_err(dev, "%s: invalid app_integrity data.\n", __func__);
> + return -EINVAL;
> + }
> + data = image->records[flash_records_count - 1].record_data;
> + app_start = get_unaligned_le32(&data[4]);
> + app_len = get_unaligned_le16(&data[8]);
> + expected_app_crc = get_unaligned_le16(&data[10]);
> + img_start = get_unaligned_le32(&data[16]);
> + img_len = get_unaligned_le16(&data[20]);
> + expected_app_integrity_crc = get_unaligned_le16(&data[60]);
I wish there was a cleaner and more descriptive way to avoid these magic
constants. Not sure if there is though :-)
> +
> + if ((app_start + app_len + img_start + img_len) %
> + CYAPA_TSG_FW_ROW_SIZE) {
> + dev_err(dev, "%s: invalid image alignment.\n", __func__);
> + return -EINVAL;
> + }
> +
> + /* Verify app_integrity crc */
> + app_integrity_crc = crc_itu_t(0xffff, data,
> + CYAPA_TSG_APP_INTEGRITY_SIZE);
> + if (app_integrity_crc != expected_app_integrity_crc) {
> + dev_err(dev, "%s: invalid app_integrity crc.\n", __func__);
> + return -EINVAL;
> + }
> +
> + /*
> + * Verify application image CRC
> + */
> + record_index = app_start / CYAPA_TSG_FW_ROW_SIZE -
> + CYAPA_TSG_IMG_START_ROW_NUM;
> + data = (u8 *)&image->records[record_index].record_data;
> + app_crc = crc_itu_t(0xffff, data, CYAPA_TSG_FW_ROW_SIZE);
> + for (i = 1; i < (app_len / CYAPA_TSG_FW_ROW_SIZE); i++) {
> + data = (u8 *)&image->records[++record_index].record_data;
> + app_crc = crc_itu_t(app_crc, data, CYAPA_TSG_FW_ROW_SIZE);
> + }
> +
> + if (app_crc != expected_app_crc) {
> + dev_err(dev, "%s: invalid firmware app crc check.\n", __func__);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int cyapa_gen5_write_fw_block(struct cyapa *cyapa,
> + struct cyapa_tsg_bin_image_data_record *flash_record)
> +{
> + u8 flash_array_id;
> + u16 flash_row_id;
> + u16 record_len;
> + u8 *record_data;
> + u8 cmd[144]; /* 13 + 128+ 3 */
^
space
What does does 144 have to do with?
> + u16 cmd_len;
> + u16 data_len;
> + u16 crc;
> + u8 resp_data[11];
> + int resp_len;
> + int error;
> +
> + flash_array_id = flash_record->flash_array_id;
> + flash_row_id = get_unaligned_be16(&flash_record->row_number);
> + record_len = get_unaligned_be16(&flash_record->record_len);
> + record_data = flash_record->record_data;
> +
> + cmd_len = sizeof(cmd) - 2; /* Not include 2 bytes regisetr address. */
register
/* Don't include 2 byte register address. */
> + memset(cmd, 0, cmd_len + 2);
> + cmd[0] = 0x04; /* Register address */
> + cmd[1] = 0x00;
> +
> + put_unaligned_le16(cmd_len, &cmd[2]);
> + cmd[4] = 0x40; /* Report id 40h */
> + cmd[5] = 0x00;
> +
> + cmd[6] = GEN5_SOP_KEY; /* SOP = 01h */
> + cmd[7] = 0x39; /* Command code = 39h */
> + /* 1 (Flash Array ID) + 2 (Flash Row ID) + 128 (flash data) */
> + data_len = 3 + record_len;
> + put_unaligned_le16(data_len, &cmd[8]);
> + cmd[10] = flash_array_id; /* Flash Array ID = 00h */
> + put_unaligned_le16(flash_row_id, &cmd[11]);
> +
> + memcpy(&cmd[13], record_data, record_len);
> + crc = crc_itu_t(0xffff, &cmd[6], 4 + data_len);
> + put_unaligned_le16(crc, &cmd[2 + cmd_len - 3]);
> + cmd[2 + cmd_len - 1] = GEN5_EOP_KEY;
> +
> + resp_len = sizeof(resp_data);
> + error = cyapa_i2c_pip_cmd_irq_sync(cyapa,
> + cmd, sizeof(cmd),
> + resp_data, &resp_len,
> + 500, cyapa_gen5_sort_tsg_pip_bl_resp_data, true);
> + if (error || resp_len != GEN5_BL_BLOCK_WRITE_RESP_LEN ||
> + resp_data[2] != GEN5_BL_RESP_REPORT_ID ||
> + !GEN5_CMD_COMPLETE_SUCCESS(resp_data[5]))
> + return error < 0 ? error : -EAGAIN;
> +
> + return 0;
> +}
> +
> +static int cyapa_gen5_do_fw_update(struct cyapa *cyapa,
> + const struct firmware *fw)
> +{
> + struct device *dev = &cyapa->client->dev;
> + struct cyapa_tsg_bin_image *image =
> + (struct cyapa_tsg_bin_image *)fw->data;
> + struct cyapa_tsg_bin_image_data_record *flash_record;
> + int flash_records_count;
> + int i;
> + int error;
> +
> + /* Try to dump all buffered data if exists before send commands. */
> + cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
> +
> + flash_records_count =
> + (fw->size - sizeof(struct cyapa_tsg_bin_image_head)) /
> + sizeof(struct cyapa_tsg_bin_image_data_record);
> + /*
> + * The last flash row 0x01ff has been written through bl_initiate
> + * command, so DO NOT write flash 0x01ff to trackpad device.
> + */
> + for (i = 0; i < (flash_records_count - 1); i++) {
> + flash_record = &image->records[i];
> + error = cyapa_gen5_write_fw_block(cyapa, flash_record);
> + if (error) {
> + dev_err(dev, "%s: Gen5 FW update aborted: %d\n",
> + __func__, error);
> + return error;
> + }
> + }
> +
> + return 0;
> +}
> +
> static int cyapa_gen5_change_power_state(struct cyapa *cyapa, u8 power_state)
> {
> u8 cmd[8] = { 0x04, 0x00, 0x06, 0x00, 0x2f, 0x00, 0x08, 0x01 };
> @@ -1648,6 +1933,11 @@ static int cyapa_gen5_irq_handler(struct cyapa *cyapa)
> }
>
> const struct cyapa_dev_ops cyapa_gen5_ops = {
> + .check_fw = cyapa_gen5_check_fw,
> + .bl_enter = cyapa_gen5_bl_enter,
> + .bl_initiate = cyapa_gen5_bl_initiate,
> + .update_fw = cyapa_gen5_do_fw_update,
> +
> .initialize = cyapa_gen5_initialize,
>
> .state_parse = cyapa_gen5_state_parse,
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
- Jeremiah Mahler
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
