The Zynq PL reset controller allows to control the 4
FCLK{0..3}_RESETN signals that can be used to reset custom IP in
the PL.
Signed-off-by: Moritz Fischer <moritz.fisc...@ettus.com>
---
drivers/reset/Makefile | 1 +
drivers/reset/reset-zynq-pl.c | 142 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 143 insertions(+)
create mode 100644 drivers/reset/reset-zynq-pl.c
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 157d421..5c86f92 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
+obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq-pl.o
diff --git a/drivers/reset/reset-zynq-pl.c b/drivers/reset/reset-zynq-pl.c
new file mode 100644
index 0000000..3e04ab0
--- /dev/null
+++ b/drivers/reset/reset-zynq-pl.c
@@ -0,0 +1,142 @@
+/*
+ * Xilinx Zynq PL Reset Controller
+ *
+ * Copyright (c) 2015, National Instruments Corp.
+ * Author: Moritz Fischer <moritz.fisc...@ettus.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+/* Offsets into SLCR regmap */
+#define SLCR_FPGA_RST_CTRL_OFFSET 0x240 /* FPGA Software Reset Control */
+
+struct zynq_pl_reset_data {
+ struct regmap *slcr;
+ struct reset_controller_dev rcdev;
+};
+
+static int zynq_pl_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct zynq_pl_reset_data *priv = container_of(rcdev,
+ struct zynq_pl_reset_data,
+ rcdev);
+
+ int offset = id % BITS_PER_LONG;
+
+ regmap_update_bits(priv->slcr,
+ SLCR_FPGA_RST_CTRL_OFFSET,
+ BIT(offset),
+ BIT(offset));
+
+ return 0;
+}
+
+static int zynq_pl_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct zynq_pl_reset_data *priv = container_of(rcdev,
+ struct zynq_pl_reset_data,
+ rcdev);
+
+ int offset = id % BITS_PER_LONG;
+
+ regmap_update_bits(priv->slcr,
+ SLCR_FPGA_RST_CTRL_OFFSET,
+ BIT(offset),
+ ~BIT(offset));
+
+ return 0;
+}
+
+static int zynq_pl_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct zynq_pl_reset_data *priv = container_of(rcdev,
+ struct zynq_pl_reset_data,
+ rcdev);
+ int offset = id % BITS_PER_LONG;
+ u32 reg;
+
+ regmap_read(priv->slcr, SLCR_FPGA_RST_CTRL_OFFSET, ®);
+
+ return !(reg & BIT(offset));
+}
+
+static const struct reset_control_ops zynq_pl_reset_ops = {
+ .assert = zynq_pl_reset_assert,
+ .deassert = zynq_pl_reset_deassert,
+ .status = zynq_pl_reset_status,
+};
+
+static int zynq_pl_reset_probe(struct platform_device *pdev)
+{
+ struct zynq_pl_reset_data *priv;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, priv);
+
+ priv->slcr = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "syscon");
+ if (IS_ERR(priv->slcr)) {
+ dev_err(&pdev->dev, "unable to get zynq-slcr regmap");
+ return PTR_ERR(priv->slcr);
+ }
+
+ priv->rcdev.owner = THIS_MODULE;
+ priv->rcdev.nr_resets = BITS_PER_LONG;
+ priv->rcdev.ops = &zynq_pl_reset_ops;
+ priv->rcdev.of_node = pdev->dev.of_node;
+ reset_controller_register(&priv->rcdev);
+
+ return 0;
+}
+
+static int zynq_pl_reset_remove(struct platform_device *pdev)
+{
+ struct zynq_pl_reset_data *priv = platform_get_drvdata(pdev);
+
+ reset_controller_unregister(&priv->rcdev);
+
+ return 0;
+}
+
+static const struct of_device_id zynq_pl_reset_dt_ids[] = {
+ { .compatible = "xlnx,zynq-reset-pl", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver zynq_pl_reset_driver = {
+ .probe = zynq_pl_reset_probe,
+ .remove = zynq_pl_reset_remove,
+ .driver = {
+ .name = "zynq-pl-reset",
+ .of_match_table = zynq_pl_reset_dt_ids,
+ },
+};
+module_platform_driver(zynq_pl_reset_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Moritz Fischer <moritz.fisc...@ettus.com>");
+MODULE_DESCRIPTION("Zynq PL Reset Controller Driver");
+MODULE_ALIAS("reset:zynq-pl");
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
