Can you not merge this with patch 2/6?
On Wed, 2015-08-12 at 16:50 +0200, Markus Pargmann wrote:
> Signed-off-by: Markus Pargmann <m...@pengutronix.de>
> ---
> drivers/iio/gyro/bmg160.c | 55
> +++++++++++++++++++++++------------------------
> 1 file changed, 27 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c
> index 6eab91ba8977..39df64fb4262 100644
> --- a/drivers/iio/gyro/bmg160.c
> +++ b/drivers/iio/gyro/bmg160.c
> @@ -110,6 +110,7 @@ struct bmg160_data {
> int slope_thres;
> bool dready_trigger_on;
> bool motion_trigger_on;
> + int irq;
> };
>
> enum bmg160_axis {
> @@ -961,18 +962,14 @@ static const struct iio_buffer_setup_ops
> bmg160_buffer_setup_ops = {
> .postdisable = bmg160_buffer_postdisable,
> };
>
> -static int bmg160_gpio_probe(struct i2c_client *client,
> - struct bmg160_data *data)
> +static int bmg160_gpio_probe(struct bmg160_data *data)
>
> {
> struct device *dev;
> struct gpio_desc *gpio;
> int ret;
>
> - if (!client)
> - return -EINVAL;
> -
> - dev = &client->dev;
> + dev = data->dev;
>
> /* data ready gpio interrupt pin */
> gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0, GPIOD_IN);
> @@ -981,11 +978,11 @@ static int bmg160_gpio_probe(struct i2c_client *client,
> return PTR_ERR(gpio);
> }
>
> - ret = gpiod_to_irq(gpio);
> + data->irq = gpiod_to_irq(gpio);
>
> dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
>
> - return ret;
> + return 0;
> }
>
> static const char *bmg160_match_acpi_device(struct device *dev)
> @@ -1007,6 +1004,7 @@ static int bmg160_probe(struct i2c_client *client,
> int ret;
> const char *name = NULL;
> struct regmap *regmap;
> + struct device *dev = &client->dev;
>
> regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
> if (IS_ERR(regmap)) {
> @@ -1020,8 +1018,9 @@ static int bmg160_probe(struct i2c_client *client,
> return -ENOMEM;
>
> data = iio_priv(indio_dev);
> - dev_set_drvdata(&client->dev, indio_dev);
> - data->dev = &client->dev;
> + dev_set_drvdata(dev, indio_dev);
> + data->dev = dev;
> + data->irq = client->irq;
>
> ret = bmg160_chip_init(data);
> if (ret < 0)
> @@ -1032,22 +1031,22 @@ static int bmg160_probe(struct i2c_client *client,
> if (id)
> name = id->name;
>
> - if (ACPI_HANDLE(&client->dev))
> - name = bmg160_match_acpi_device(&client->dev);
> + if (ACPI_HANDLE(dev))
> + name = bmg160_match_acpi_device(dev);
>
> - indio_dev->dev.parent = &client->dev;
> + indio_dev->dev.parent = dev;
> indio_dev->channels = bmg160_channels;
> indio_dev->num_channels = ARRAY_SIZE(bmg160_channels);
> indio_dev->name = name;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->info = &bmg160_info;
>
> - if (client->irq <= 0)
> - client->irq = bmg160_gpio_probe(client, data);
> + if (data->irq <= 0)
> + bmg160_gpio_probe(data);
>
> - if (client->irq > 0) {
> - ret = devm_request_threaded_irq(&client->dev,
> - client->irq,
> + if (data->irq > 0) {
> + ret = devm_request_threaded_irq(dev,
> + data->irq,
> bmg160_data_rdy_trig_poll,
> bmg160_event_handler,
> IRQF_TRIGGER_RISING,
> @@ -1056,28 +1055,28 @@ static int bmg160_probe(struct i2c_client *client,
> if (ret)
> return ret;
>
> - data->dready_trig = devm_iio_trigger_alloc(&client->dev,
> + data->dready_trig = devm_iio_trigger_alloc(dev,
> "%s-dev%d",
> indio_dev->name,
> indio_dev->id);
> if (!data->dready_trig)
> return -ENOMEM;
>
> - data->motion_trig = devm_iio_trigger_alloc(&client->dev,
> + data->motion_trig = devm_iio_trigger_alloc(dev,
> "%s-any-motion-dev%d",
> indio_dev->name,
> indio_dev->id);
> if (!data->motion_trig)
> return -ENOMEM;
>
> - data->dready_trig->dev.parent = &client->dev;
> + data->dready_trig->dev.parent = dev;
> data->dready_trig->ops = &bmg160_trigger_ops;
> iio_trigger_set_drvdata(data->dready_trig, indio_dev);
> ret = iio_trigger_register(data->dready_trig);
> if (ret)
> return ret;
>
> - data->motion_trig->dev.parent = &client->dev;
> + data->motion_trig->dev.parent = dev;
> data->motion_trig->ops = &bmg160_trigger_ops;
> iio_trigger_set_drvdata(data->motion_trig, indio_dev);
> ret = iio_trigger_register(data->motion_trig);
> @@ -1092,25 +1091,25 @@ static int bmg160_probe(struct i2c_client *client,
> bmg160_trigger_handler,
> &bmg160_buffer_setup_ops);
> if (ret < 0) {
> - dev_err(&client->dev,
> + dev_err(dev,
> "iio triggered buffer setup failed\n");
> goto err_trigger_unregister;
> }
>
> ret = iio_device_register(indio_dev);
> if (ret < 0) {
> - dev_err(&client->dev, "unable to register iio device\n");
> + dev_err(dev, "unable to register iio device\n");
> goto err_buffer_cleanup;
> }
>
> - ret = pm_runtime_set_active(&client->dev);
> + ret = pm_runtime_set_active(dev);
> if (ret)
> goto err_iio_unregister;
>
> - pm_runtime_enable(&client->dev);
> - pm_runtime_set_autosuspend_delay(&client->dev,
> + pm_runtime_enable(dev);
> + pm_runtime_set_autosuspend_delay(dev,
> BMG160_AUTO_SUSPEND_DELAY_MS);
> - pm_runtime_use_autosuspend(&client->dev);
> + pm_runtime_use_autosuspend(dev);
>
> return 0;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
