This patch replaces bit shifting on 1 with the BIT(x) macro
as it's extensively used by other function in this driver.

This was done with coccinelle:
@@ int g; @@

-(1 << g)
+BIT(g)

Signed-off-by: Shraddha Barke <shraddha.6...@gmail.com>
---
 drivers/staging/iio/cdc/ad7746.c | 42 ++++++++++++++++++++--------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index e6e9eaa..e17d4e1 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -46,48 +46,48 @@
 #define AD7746_REG_VOLT_GAINL          18
 
 /* Status Register Bit Designations (AD7746_REG_STATUS) */
-#define AD7746_STATUS_EXCERR           (1 << 3)
-#define AD7746_STATUS_RDY              (1 << 2)
-#define AD7746_STATUS_RDYVT            (1 << 1)
-#define AD7746_STATUS_RDYCAP           (1 << 0)
+#define AD7746_STATUS_EXCERR           BIT(3)
+#define AD7746_STATUS_RDY              BIT(2)
+#define AD7746_STATUS_RDYVT            BIT(1)
+#define AD7746_STATUS_RDYCAP           BIT(0)
 
 /* Capacitive Channel Setup Register Bit Designations (AD7746_REG_CAP_SETUP) */
-#define AD7746_CAPSETUP_CAPEN          (1 << 7)
-#define AD7746_CAPSETUP_CIN2           (1 << 6) /* AD7746 only */
-#define AD7746_CAPSETUP_CAPDIFF                (1 << 5)
-#define AD7746_CAPSETUP_CACHOP         (1 << 0)
+#define AD7746_CAPSETUP_CAPEN          BIT(7)
+#define AD7746_CAPSETUP_CIN2           BIT(6) /* AD7746 only */
+#define AD7746_CAPSETUP_CAPDIFF                BIT(5)
+#define AD7746_CAPSETUP_CACHOP         BIT(0)
 
 /* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
-#define AD7746_VTSETUP_VTEN            (1 << 7)
+#define AD7746_VTSETUP_VTEN            BIT(7)
 #define AD7746_VTSETUP_VTMD_INT_TEMP   (0 << 5)
-#define AD7746_VTSETUP_VTMD_EXT_TEMP   (1 << 5)
+#define AD7746_VTSETUP_VTMD_EXT_TEMP   BIT(5)
 #define AD7746_VTSETUP_VTMD_VDD_MON    (2 << 5)
 #define AD7746_VTSETUP_VTMD_EXT_VIN    (3 << 5)
-#define AD7746_VTSETUP_EXTREF          (1 << 4)
-#define AD7746_VTSETUP_VTSHORT         (1 << 1)
-#define AD7746_VTSETUP_VTCHOP          (1 << 0)
+#define AD7746_VTSETUP_EXTREF          BIT(4)
+#define AD7746_VTSETUP_VTSHORT         BIT(1)
+#define AD7746_VTSETUP_VTCHOP          BIT(0)
 
 /* Excitation Setup Register Bit Designations (AD7746_REG_EXC_SETUP) */
-#define AD7746_EXCSETUP_CLKCTRL                (1 << 7)
-#define AD7746_EXCSETUP_EXCON          (1 << 6)
-#define AD7746_EXCSETUP_EXCB           (1 << 5)
-#define AD7746_EXCSETUP_NEXCB          (1 << 4)
-#define AD7746_EXCSETUP_EXCA           (1 << 3)
-#define AD7746_EXCSETUP_NEXCA          (1 << 2)
+#define AD7746_EXCSETUP_CLKCTRL                BIT(7)
+#define AD7746_EXCSETUP_EXCON          BIT(6)
+#define AD7746_EXCSETUP_EXCB           BIT(5)
+#define AD7746_EXCSETUP_NEXCB          BIT(4)
+#define AD7746_EXCSETUP_EXCA           BIT(3)
+#define AD7746_EXCSETUP_NEXCA          BIT(2)
 #define AD7746_EXCSETUP_EXCLVL(x)      (((x) & 0x3) << 0)
 
 /* Config Register Bit Designations (AD7746_REG_CFG) */
 #define AD7746_CONF_VTFS(x)            ((x) << 6)
 #define AD7746_CONF_CAPFS(x)           ((x) << 3)
 #define AD7746_CONF_MODE_IDLE          (0 << 0)
-#define AD7746_CONF_MODE_CONT_CONV     (1 << 0)
+#define AD7746_CONF_MODE_CONT_CONV     BIT(0)
 #define AD7746_CONF_MODE_SINGLE_CONV   (2 << 0)
 #define AD7746_CONF_MODE_PWRDN         (3 << 0)
 #define AD7746_CONF_MODE_OFFS_CAL      (5 << 0)
 #define AD7746_CONF_MODE_GAIN_CAL      (6 << 0)
 
 /* CAPDAC Register Bit Designations (AD7746_REG_CAPDACx) */
-#define AD7746_CAPDAC_DACEN            (1 << 7)
+#define AD7746_CAPDAC_DACEN            BIT(7)
 #define AD7746_CAPDAC_DACP(x)          ((x) & 0x7F)
 
 /*
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to