Benster & Jeremy wrote:
On Mon, 2009-04-20 at 16:04 -0400, Steven Toth wrote:
So, under MCE find a major network ABC, NBC or CBS that works perfectly for you
then locate the RF channel on antenna web.org.
These all come in fine on mce.
KDKA-DT 2.1 25
WTAE-DT 4.1 51
WQED-DT 13.1 38
(Rule #2, always CC the mailing list. Don't drop them off, even by accident. An
honest mistake on your part so I've added them back in.)
Modify your $HOME/.azap/channels.conf to look like this:
ch25:539000000:8VSB:65:68:4
ch38:614000000:8VSB:65:68:4
ch51:695000000:8VSB:65:68:4
The use the following command to tune ch25:
azap -r ch25
What happens next?
- Steve
No indicator light - I know this is probably just a bit set somewhere
that turns on/off the light and has nothing to do with actual operation
of the card, but thought I would mention it.
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 539000000 Hz
video pid 0x0041, audio pid 0x0044
status 00 | signal 7fe2 | snr 0000 | ber 00000000 | unc 00000000 |
status 00 | signal 008c | snr 0082 | ber 00000000 | unc 00000000 |
....last line repeats indefinitely.....I hit ^c.
tried a second time - now all lines match last line and again I hit ^c.
also the same as the second line for the other two channels.
Something I forgot to mention, if you remove the card with the system
running linux it results in a freeze with a blinking caps lock led (btw
it's a hp dv9208nr laptop). It's ok under windows (32bit). I am running
64 bit linux.
If I insert the card after booting linux without it, the lines
referencing the card do not get added to dmesg's output, and the /dev
entries do not appear. udevd issue or driver?
Hot swap is not supported, always cold boot with the device inserted.
I don't have any other expresscards that I could plug-in to see if hot
swap works on other things.
Ben
oops on the reply list. It has been a long time since I wrote to a mail
list. I did catch one thing before you needed to tell me - i switched to
plain text from html mail.
I tested a 77001 D3C0 rev and it doesn't locked for me either.
This used to work. Either the xc3028 or s5h1409 driver has a regression.
End result: Bug, broken. Thanks for highlighting this.
- Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
