Thomas Nicolai wrote:
I tried updating it just a few minutes ago. After a restart, I tried using the card. I still get no lights on the card and get no lock on any channels. with MCE in windows I get about 6 channels at my location, all with very good signal strength.
Here is my output from lspci -vnn followed by the out put from dmesg. I am
sorry it is so long, I wanted to include it all in case you see something I
missed.
<snip>
----------------------------------------
Date: Mon, 20 Apr 2009 21:51:27 -0400
From: st...@linuxtv.org
Subject: Re: Hauppauge HVR-1500 (aka HP RM436AA#ABA)
To: pgh...@yahoo.com
CC: linux-media@vger.kernel.org; mche...@infradead.org
If there is anything I can do that will help you find the bug, please
let me know..
The issue is fixed.
http://linuxtv.org/hg/~stoth/cx23885-hvr1500/rev/7853c00870e1
It's locking OK for me now. If you can clone, built and test - thus confirm the
fix - that would be great.
Build instructions on the wiki:
http://linuxtv.org/wiki/index.php/How_to_Obtain%2C_Build_and_Install_V4L-DVB_Device_Drivers
Thanks,
- Steve
Don't top-post. The protocol is to reply underneath the previous email.
Ben confirm the patch works correctly for him also, so I suspect you have some
kind of build or installation problem. Maybe your missing firmware?
Your lspci and dmesg output looked good, I see no issues with this.
- Steve
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
