A device tree compatible makes it possible for this driver to be used on Open Firmware devices. Initialization of power-managed resources such as the reset GPIO and voltage regulators can be specified in the device tree and handled by the driver. Add support for this so the Pixel 3a can use the driver.
Signed-off-by: Richard Acayan <[email protected]> Nacked-by: Krzysztof Kozlowski <[email protected]> --- drivers/media/i2c/imx355.c | 116 ++++++++++++++++++++++++++++++++++--- 1 file changed, 108 insertions(+), 8 deletions(-) diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c index 776107efe386..4ac8495d1a3d 100644 --- a/drivers/media/i2c/imx355.c +++ b/drivers/media/i2c/imx355.c @@ -3,9 +3,13 @@ #include <linux/acpi.h> #include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h> #include <linux/unaligned.h> #include <media/v4l2-ctrls.h> @@ -125,6 +129,15 @@ struct imx355 { * Protect access to sensor v4l2 controls. */ struct mutex mutex; + + struct gpio_desc *reset_gpio; + struct regulator_bulk_data *supplies; +}; + +static const struct regulator_bulk_data imx355_supplies[] = { + { .supply = "avdd" }, + { .supply = "dvdd" }, + { .supply = "dovdd" }, }; static const struct imx355_reg imx355_global_regs[] = { @@ -1515,6 +1528,55 @@ static const struct v4l2_subdev_internal_ops imx355_internal_ops = { .open = imx355_open, }; +static int imx355_power_off(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct imx355 *imx355 = to_imx355(sd); + + gpiod_set_value_cansleep(imx355->reset_gpio, 1); + + regulator_bulk_disable(ARRAY_SIZE(imx355_supplies), imx355->supplies); + clk_disable_unprepare(imx355->clk); + + return 0; +} + +static int imx355_power_on(struct device *dev) +{ + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct imx355 *imx355 = to_imx355(sd); + int ret; + + ret = clk_prepare_enable(imx355->clk); + if (ret) { + dev_err(dev, "failed to enable clocks: %d\n", ret); + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(imx355_supplies), + imx355->supplies); + if (ret) { + dev_err(dev, "failed to enable regulators: %d\n", ret); + goto error_disable_clocks; + } + + gpiod_set_value_cansleep(imx355->reset_gpio, 1); + usleep_range(5000, 5100); + gpiod_set_value_cansleep(imx355->reset_gpio, 0); + usleep_range(8000, 8100); + + return 0; + +error_disable_clocks: + clk_disable_unprepare(imx355->clk); + return ret; +} + +static DEFINE_RUNTIME_DEV_PM_OPS(imx355_pm_ops, imx355_power_off, + imx355_power_on, NULL); + /* Initialize control handlers */ static int imx355_init_controls(struct imx355 *imx355) { @@ -1689,16 +1751,26 @@ static int imx355_probe(struct i2c_client *client) "external clock %lu is not supported\n", freq); - /* Initialize subdev */ - v4l2_i2c_subdev_init(&imx355->sd, client, &imx355_subdev_ops); - - /* Check module identity */ - ret = imx355_identify_module(imx355); + ret = devm_regulator_bulk_get_const(imx355->dev, + ARRAY_SIZE(imx355_supplies), + imx355_supplies, + &imx355->supplies); if (ret) { - dev_err(imx355->dev, "failed to find sensor: %d", ret); + dev_err_probe(imx355->dev, ret, "could not get regulators"); goto error_probe; } + imx355->reset_gpio = devm_gpiod_get_optional(imx355->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(imx355->reset_gpio)) { + ret = dev_err_probe(imx355->dev, PTR_ERR(imx355->reset_gpio), + "failed to get gpios"); + goto error_probe; + } + + /* Initialize subdev */ + v4l2_i2c_subdev_init(&imx355->sd, client, &imx355_subdev_ops); + imx355->hwcfg = imx355_get_hwcfg(imx355->dev); if (!imx355->hwcfg) { dev_err(imx355->dev, "failed to get hwcfg"); @@ -1706,13 +1778,26 @@ static int imx355_probe(struct i2c_client *client) goto error_probe; } + ret = imx355_power_on(imx355->dev); + if (ret) { + dev_err(imx355->dev, "failed to power on sensor: %d", ret); + goto error_probe; + } + + /* Check module identity */ + ret = imx355_identify_module(imx355); + if (ret) { + dev_err(imx355->dev, "failed to find sensor: %d", ret); + goto error_power_off; + } + /* Set default mode to max resolution */ imx355->cur_mode = &supported_modes[0]; ret = imx355_init_controls(imx355); if (ret) { dev_err(imx355->dev, "failed to init controls: %d", ret); - goto error_probe; + goto error_power_off; } /* Initialize subdev */ @@ -1752,6 +1837,9 @@ static int imx355_probe(struct i2c_client *client) error_handler_free: v4l2_ctrl_handler_free(imx355->sd.ctrl_handler); +error_power_off: + imx355_power_off(imx355->dev); + error_probe: mutex_destroy(&imx355->mutex); @@ -1768,7 +1856,11 @@ static void imx355_remove(struct i2c_client *client) v4l2_ctrl_handler_free(sd->ctrl_handler); pm_runtime_disable(imx355->dev); - pm_runtime_set_suspended(imx355->dev); + + if (!pm_runtime_status_suspended(imx355->dev)) { + imx355_power_off(imx355->dev); + pm_runtime_set_suspended(imx355->dev); + } mutex_destroy(&imx355->mutex); } @@ -1779,10 +1871,18 @@ static const struct acpi_device_id imx355_acpi_ids[] __maybe_unused = { }; MODULE_DEVICE_TABLE(acpi, imx355_acpi_ids); +static const struct of_device_id imx355_match_table[] __maybe_unused = { + { .compatible = "sony,imx355", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, imx355_match_table); + static struct i2c_driver imx355_i2c_driver = { .driver = { .name = "imx355", .acpi_match_table = ACPI_PTR(imx355_acpi_ids), + .of_match_table = imx355_match_table, + .pm = &imx355_pm_ops, }, .probe = imx355_probe, .remove = imx355_remove, -- 2.52.0
