Hi Richard,
On Tue, Jan 06, 2026 at 11:30:41PM -0500, Richard Acayan wrote:
> A device tree compatible makes it possible for this driver to be used on
> Open Firmware devices. Initialization of power-managed resources such as
> the reset GPIO and voltage regulators can be specified in the device
> tree and handled by the driver. Add support for this so the Pixel 3a can
> use the driver.
>
> Signed-off-by: Richard Acayan <[email protected]>
> Nacked-by: Krzysztof Kozlowski <[email protected]>
Uh-oh.
> ---
> drivers/media/i2c/imx355.c | 116 ++++++++++++++++++++++++++++++++++---
> 1 file changed, 108 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/media/i2c/imx355.c b/drivers/media/i2c/imx355.c
> index 776107efe386..4ac8495d1a3d 100644
> --- a/drivers/media/i2c/imx355.c
> +++ b/drivers/media/i2c/imx355.c
> @@ -3,9 +3,13 @@
>
> #include <linux/acpi.h>
> #include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/unaligned.h>
>
> #include <media/v4l2-ctrls.h>
> @@ -125,6 +129,15 @@ struct imx355 {
> * Protect access to sensor v4l2 controls.
> */
> struct mutex mutex;
> +
> + struct gpio_desc *reset_gpio;
> + struct regulator_bulk_data *supplies;
> +};
> +
> +static const struct regulator_bulk_data imx355_supplies[] = {
> + { .supply = "avdd" },
> + { .supply = "dvdd" },
> + { .supply = "dovdd" },
> };
>
> static const struct imx355_reg imx355_global_regs[] = {
> @@ -1515,6 +1528,55 @@ static const struct v4l2_subdev_internal_ops
> imx355_internal_ops = {
> .open = imx355_open,
> };
>
> +static int imx355_power_off(struct device *dev)
> +{
> + struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct imx355 *imx355 = to_imx355(sd);
> +
> + gpiod_set_value_cansleep(imx355->reset_gpio, 1);
> +
> + regulator_bulk_disable(ARRAY_SIZE(imx355_supplies), imx355->supplies);
> + clk_disable_unprepare(imx355->clk);
> +
> + return 0;
> +}
> +
> +static int imx355_power_on(struct device *dev)
> +{
> + struct i2c_client *client = container_of(dev, struct i2c_client, dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct imx355 *imx355 = to_imx355(sd);
> + int ret;
> +
> + ret = clk_prepare_enable(imx355->clk);
> + if (ret) {
> + dev_err(dev, "failed to enable clocks: %d\n", ret);
> + return ret;
> + }
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(imx355_supplies),
> + imx355->supplies);
> + if (ret) {
> + dev_err(dev, "failed to enable regulators: %d\n", ret);
> + goto error_disable_clocks;
> + }
> +
> + gpiod_set_value_cansleep(imx355->reset_gpio, 1);
> + usleep_range(5000, 5100);
> + gpiod_set_value_cansleep(imx355->reset_gpio, 0);
> + usleep_range(8000, 8100);
Where do these values come from? Apparently 1 ms is required (after lifting
xshutdown) before reading identification register and 10 ms is required
(from the same point of time) before streaming can be enabled.
> +
> + return 0;
> +
> +error_disable_clocks:
> + clk_disable_unprepare(imx355->clk);
> + return ret;
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(imx355_pm_ops, imx355_power_off,
> + imx355_power_on, NULL);
> +
> /* Initialize control handlers */
> static int imx355_init_controls(struct imx355 *imx355)
> {
> @@ -1689,16 +1751,26 @@ static int imx355_probe(struct i2c_client *client)
> "external clock %lu is not supported\n",
> freq);
>
> - /* Initialize subdev */
> - v4l2_i2c_subdev_init(&imx355->sd, client, &imx355_subdev_ops);
> -
> - /* Check module identity */
> - ret = imx355_identify_module(imx355);
> + ret = devm_regulator_bulk_get_const(imx355->dev,
> + ARRAY_SIZE(imx355_supplies),
> + imx355_supplies,
> + &imx355->supplies);
> if (ret) {
> - dev_err(imx355->dev, "failed to find sensor: %d", ret);
> + dev_err_probe(imx355->dev, ret, "could not get regulators");
> goto error_probe;
> }
>
> + imx355->reset_gpio = devm_gpiod_get_optional(imx355->dev, "reset",
> + GPIOD_OUT_LOW);
s/LOW/HIGH/
> + if (IS_ERR(imx355->reset_gpio)) {
> + ret = dev_err_probe(imx355->dev, PTR_ERR(imx355->reset_gpio),
> + "failed to get gpios");
> + goto error_probe;
> + }
> +
> + /* Initialize subdev */
> + v4l2_i2c_subdev_init(&imx355->sd, client, &imx355_subdev_ops);
> +
> imx355->hwcfg = imx355_get_hwcfg(imx355->dev);
> if (!imx355->hwcfg) {
> dev_err(imx355->dev, "failed to get hwcfg");
> @@ -1706,13 +1778,26 @@ static int imx355_probe(struct i2c_client *client)
> goto error_probe;
> }
>
> + ret = imx355_power_on(imx355->dev);
> + if (ret) {
> + dev_err(imx355->dev, "failed to power on sensor: %d", ret);
> + goto error_probe;
> + }
> +
> + /* Check module identity */
> + ret = imx355_identify_module(imx355);
> + if (ret) {
> + dev_err(imx355->dev, "failed to find sensor: %d", ret);
> + goto error_power_off;
> + }
> +
> /* Set default mode to max resolution */
> imx355->cur_mode = &supported_modes[0];
>
> ret = imx355_init_controls(imx355);
> if (ret) {
> dev_err(imx355->dev, "failed to init controls: %d", ret);
> - goto error_probe;
> + goto error_power_off;
> }
>
> /* Initialize subdev */
> @@ -1752,6 +1837,9 @@ static int imx355_probe(struct i2c_client *client)
> error_handler_free:
> v4l2_ctrl_handler_free(imx355->sd.ctrl_handler);
>
> +error_power_off:
> + imx355_power_off(imx355->dev);
> +
> error_probe:
> mutex_destroy(&imx355->mutex);
>
> @@ -1768,7 +1856,11 @@ static void imx355_remove(struct i2c_client *client)
> v4l2_ctrl_handler_free(sd->ctrl_handler);
>
> pm_runtime_disable(imx355->dev);
> - pm_runtime_set_suspended(imx355->dev);
> +
> + if (!pm_runtime_status_suspended(imx355->dev)) {
> + imx355_power_off(imx355->dev);
> + pm_runtime_set_suspended(imx355->dev);
> + }
>
> mutex_destroy(&imx355->mutex);
> }
> @@ -1779,10 +1871,18 @@ static const struct acpi_device_id imx355_acpi_ids[]
> __maybe_unused = {
> };
> MODULE_DEVICE_TABLE(acpi, imx355_acpi_ids);
>
> +static const struct of_device_id imx355_match_table[] __maybe_unused = {
Please drop __maybe_unused; it's redundant.
> + { .compatible = "sony,imx355", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx355_match_table);
> +
> static struct i2c_driver imx355_i2c_driver = {
> .driver = {
> .name = "imx355",
> .acpi_match_table = ACPI_PTR(imx355_acpi_ids),
> + .of_match_table = imx355_match_table,
> + .pm = &imx355_pm_ops,
> },
> .probe = imx355_probe,
> .remove = imx355_remove,
--
Kind regards,
Sakari Ailus
