On Tue February 5 2013 18:08:31 Arvydas Sidorenko wrote:
> On Tue, Feb 5, 2013 at 5:56 PM, Ezequiel Garcia <elezegar...@gmail.com> wrote:
> > On Tue, Feb 5, 2013 at 12:35 PM, Hans Verkuil <hverk...@xs4all.nl> wrote:
> >> On Tue February 5 2013 16:28:17 Arvydas Sidorenko wrote:
> >>>
> >>> I have tested the patches using STK-1135 webcam. Everything works well.
> >>>
> >>> $ v4l2-compliance -d /dev/video0
> >>> Driver Info:
> >>> Driver name : stk
> >>> Card type : stk
> >>> Bus info :
> >>> Driver version: 0.0.1
> >>
> >> This is the old version of the driver you are testing with :-)
> >>
> >
> > @Arvydas: First of all, thanks for taking the time to test Hans' patches.
> >
> > I suggest to double check the old driver
> > is not loaded and then run "depmod -a" to update modules.
> >
> > As a last resource you can always wipe out the driver from
> > /lib/modules/what-ever and reinstall.
> >
> > Hope this helps!
> >
> > --
> > Ezequiel
>
> Yes, I am sorry. I built the wrong branch.
>
> The cam works, but the view is upside down.
Hmm, can you try this without my patches? Some work has been done recently
regarding upside-down sensors and I need to know whether I broke it or
whether those earlier changes broke it for you. I checked my code and I
didn't see anything obviously wrong.
>
> $ v4l2-compliance -d /dev/video0
> Driver Info:
> Driver name : stk
> Card type : stk
> Bus info : 4-8
> Driver version: 3.1.0
> Capabilities : 0x85000001
> Video Capture
> Read/Write
> Streaming
> Device Capabilities
> Device Caps : 0x05000001
> Video Capture
> Read/Write
> Streaming
>
> Compliance test for device /dev/video0 (not using libv4l2):
>
> Required ioctls:
> fail: v4l2-compliance.cpp(285): missing bus_info prefix ('4-8')
Correct, that's my fault. I've fixed that in my git branch.
> test VIDIOC_QUERYCAP: FAIL
>
> Allow for multiple opens:
> test second video open: OK
> fail: v4l2-compliance.cpp(285): missing bus_info prefix ('4-8')
> test VIDIOC_QUERYCAP: FAIL
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G_CHIP_IDENT: OK (Not Supported)
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Control ioctls:
> test VIDIOC_QUERYCTRL/MENU: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 4 Private Controls: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_PRESETS: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> fail: v4l2-test-formats.cpp(566): Video Capture is valid, but
> TRY_FMT failed to return a format
> test VIDIOC_TRY_FMT: FAIL
> fail: v4l2-test-formats.cpp(719): Video Capture is valid, but no
> S_FMT was implemented
Are you sure you are using the v4l2-compliance from the latest v4l-utils.git
repository? I've made some changes in these format compliance tests and I think
you don't have those changes.
> test VIDIOC_S_FMT: FAIL
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: v4l2-test-buffers.cpp(132): ret != -1
I need to look into this a bit more. I probably need to improve v4l2-compliance
itself so I get better feedback as to which error is actually returned here.
Thank you very much for testing!
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
