Hi Ben
Cc Laurent, Geert, Magnus
> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts
> b/arch/arm/boot/dts/r8a7790-lager.dts
> index aaa4f258e279..5f68e53c58ae 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -488,6 +488,9 @@
> pinctrl-0 = <&sdhi0_pins>;
> pinctrl-names = "default";
>
> + assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
> + assigned-clock-rates = <156000000>;
> +
> vmmc-supply = <&vcc_sdhi0>;
> vqmmc-supply = <&vccq_sdhi0>;
> cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
> @@ -498,6 +501,9 @@
> pinctrl-0 = <&sdhi2_pins>;
> pinctrl-names = "default";
>
> + assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
> + assigned-clock-rates = <97500000>;
> +
> vmmc-supply = <&vcc_sdhi2>;
> vqmmc-supply = <&vccq_sdhi2>;
> cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
Thank you for your patch, but I still wandering about this.
Please correct me if I'm misunderstanding.
Above seetings is for SDHI IP, and it can divide it ?
The image is
[CPG] -> 156 MHz -> [SDHI] -> 1/x -> [CARD]
~~~~~~~
If so, why we can't use max-frequency ?
We can calculate/set SDHI IP clocks via
max-frequency / clk_round_rate() / clk_set_rate()
since we know SDHI's divider capability.
SH-MMC is using this style. and I think it is flexible for every speed.
Please check sh_mmcif_clock_control(), sh_mmcif_clk_setup()
on ${LINUX}/drivers/mmc/host/sh_mmcif.c
Best regards
---
Kuninori Morimoto
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
