On Fri, 26 Feb 1999, Robert Baines wrote: > it *will* make log files. enable mgetty, get someone to phone you and wait > while it fails to connect. then run a 'find' if you need to, to get the > log file. if you don't have a log file it means mgetty did not go into > action. OK... I found the log file and took the liberty to attach it. I hope that's OK - it's not too huge. Unfortunately, it could quite as well be written in Chinese - I just can't make any sense of it. The way I obtained it was thus: First, I deleted the old log file. It was getting a bit big. Then I tried to dial in from another computer using HyperTerminal again. A while after HyperTerminal had timed out, I turned the modem in the Linux machine off - it was still happily screeching away. And the attached log file is all I got out of that. Can you make any sense of the log? > robert Thanks, Juergen
-- 02/26 01:32:27 yS1 mgetty: official release 1.0.0 02/26 01:32:27 yS1 mgetty.c compiled at Feb 23 1999, 17:49:50 02/26 01:32:27 yS1 reading configuration data for port 'ttyS1' 02/26 01:32:27 yS1 conf lib: read: 'debug 4' 02/26 01:32:27 yS1 conf lib: read: 'fax-id 49 89 xxxxxxxx' 02/26 01:32:27 yS1 conf lib: read: 'speed 38400' 02/26 01:32:27 yS1 key: 'speed', type=0, flags=2, data=57600 02/26 01:32:27 yS1 key: 'switchbd', type=0, flags=1, data=0 02/26 01:32:27 yS1 key: 'direct', type=3, flags=1, data=FALSE 02/26 01:32:27 yS1 key: 'blocking', type=3, flags=1, data=FALSE 02/26 01:32:27 yS1 key: 'port-owner', type=1, flags=1, data=uucp 02/26 01:32:27 yS1 key: 'port-group', type=1, flags=1, data=modem 02/26 01:32:27 yS1 key: 'port-mode', type=0, flags=1, data=432 02/26 01:32:27 yS1 key: 'toggle-dtr', type=3, flags=1, data=TRUE 02/26 01:32:27 yS1 key: 'toggle-dtr-waittime', type=0, flags=1, data=500 02/26 01:32:27 yS1 key: 'data-only', type=3, flags=1, data=FALSE 02/26 01:32:27 yS1 key: 'fax-only', type=3, flags=1, data=FALSE 02/26 01:32:27 yS1 key: 'modem-type', type=1, flags=1, data=auto 02/26 01:32:27 yS1 key: 'init-chat', type=2, flags=1, data= \dATQ0V1H0 OK ATS0=0Q0&D3&C1 OK 02/26 01:32:27 yS1 key: 'force-init-chat', type=2, flags=1, data= \d\d\d\d+++\d\d\d \dATQ0V1H0 OK 02/26 01:32:27 yS1 key: 'modem-check-time', type=0, flags=1, data=3600 02/26 01:32:27 yS1 key: 'rings', type=0, flags=2, data=2 02/26 01:32:27 yS1 key: 'get-cnd-chat', type=2, flags=0, data=(empty) 02/26 01:32:27 yS1 key: 'answer-chat', type=2, flags=1, data= ATA CONNECT \c 02/26 01:32:27 yS1 key: 'answer-chat-timeout', type=0, flags=1, data=80 02/26 01:32:27 yS1 key: 'autobauding', type=3, flags=1, data=FALSE 02/26 01:32:27 yS1 key: 'ringback', type=3, flags=1, data=FALSE 02/26 01:32:27 yS1 key: 'ringback-time', type=0, flags=1, data=30 02/26 01:32:27 yS1 key: 'ignore-carrier', type=3, flags=1, data=FALSE 02/26 01:32:27 yS1 key: 'issue-file', type=1, flags=1, data=/etc/issue 02/26 01:32:27 yS1 key: 'prompt-waittime', type=0, flags=1, data=500 02/26 01:32:27 yS1 key: 'login-prompt', type=1, flags=1, data=@!login: 02/26 01:32:27 yS1 key: 'login-time', type=0, flags=1, data=240 02/26 01:32:27 yS1 key: 'fido-send-emsi', type=3, flags=1, data=TRUE 02/26 01:32:27 yS1 key: 'fax-id', type=1, flags=3, data=49 89 xxxxxxxx 02/26 01:32:27 yS1 key: 'fax-server-file', type=1, flags=0, data=(empty) 02/26 01:32:27 yS1 key: 'diskspace', type=0, flags=1, data=1024 02/26 01:32:27 yS1 key: 'notify', type=1, flags=1, data=faxadmin 02/26 01:32:27 yS1 key: 'fax-owner', type=1, flags=1, data=uucp 02/26 01:32:27 yS1 key: 'fax-group', type=1, flags=0, data=(empty) 02/26 01:32:27 yS1 key: 'fax-mode', type=0, flags=1, data=432 02/26 01:32:27 yS1 key: 'debug', type=0, flags=2, data=5 02/26 01:32:27 yS1 key: 'statistics-chat', type=2, flags=0, data=(empty) 02/26 01:32:27 yS1 key: 'statistics-file', type=1, flags=0, data=(empty) 02/26 01:32:27 yS1 key: 'gettydefs', type=1, flags=1, data=n 02/26 01:32:27 yS1 key: 'term', type=1, flags=0, data=(empty) 02/26 01:32:27 yS1 check for lockfiles 02/26 01:32:27 yS1 checklock: stat failed, no file 02/26 01:32:27 yS1 locking the line 02/26 01:32:27 yS1 makelock(ttyS1) called 02/26 01:32:27 yS1 do_makelock: lock='/var/lock/LCK..ttyS1' 02/26 01:32:27 yS1 lock made 02/26 01:32:27 yS1 can't get group 'modem': No such file or directory 02/26 01:32:28 yS1 tio_get_rs232_lines: status: RTS CTS DSR DTR 02/26 01:32:28 yS1 lowering DTR to reset Modem 02/26 01:32:28 yS1 tss: set speed to 57600 (10001) 02/26 01:32:28 yS1 tio_set_flow_control( HARD ) 02/26 01:32:28 yS1 waiting for line to clear (VTIME), read: 02/26 01:32:29 yS1 send: \dATQ0V1H0[0d] 02/26 01:32:29 yS1 waiting for ``OK'' 02/26 01:32:29 yS1 got: ATQ0V1H0[0d][0d][0a]OK ** found ** 02/26 01:32:29 yS1 send: ATS0=0Q0&D3&C1[0d] 02/26 01:32:29 yS1 waiting for ``OK'' 02/26 01:32:29 yS1 got: [0d][0a]ATS0=0Q0&D3&C1[0d][0d][0a]OK ** found ** 02/26 01:32:29 yS1 mdm_send: 'AT+FCLASS=2.0' 02/26 01:32:29 yS1 mdm_command: string 'AT+FCLASS=2.0' 02/26 01:32:30 yS1 mdm_command: string 'OK' -> OK 02/26 01:32:30 yS1 mdm_send: 'AT+FAA=1;+FCR=1' 02/26 01:32:30 yS1 mdm_command: string 'AT+FAA=1;+FCR=1' 02/26 01:32:30 yS1 mdm_command: string 'OK' -> OK 02/26 01:32:30 yS1 mdm_send: 'AT+FBO=1' 02/26 01:32:30 yS1 mdm_command: string 'AT+FBO=1' 02/26 01:32:30 yS1 mdm_command: string 'OK' -> OK 02/26 01:32:30 yS1 mdm_send: 'AT+FNR=1,1,1,0' 02/26 01:32:30 yS1 mdm_command: string 'AT+FNR=1,1,1,0' 02/26 01:32:30 yS1 mdm_command: string 'OK' -> OK 02/26 01:32:30 yS1 mdm_send: 'AT+FLI="49 89 xxxxxxxx"' 02/26 01:32:30 yS1 mdm_command: string 'AT+FLI="49 89 xxxxxxxx"' 02/26 01:32:30 yS1 mdm_command: string 'OK' -> OK 02/26 01:32:30 yS1 mdm_send: 'AT+FCC=1,5,0,2,0,0,0,0' 02/26 01:32:30 yS1 mdm_command: string 'AT+FCC=1,5,0,2,0,0,0,0' 02/26 01:32:30 yS1 mdm_command: string 'OK' -> OK 02/26 01:32:30 yS1 waiting for line to clear (VTIME), read: 02/26 01:32:31 yS1 removing lock file 02/26 01:32:31 yS1 waiting... 02/26 01:43:18 yS1 checking lockfiles, locking the line 02/26 01:43:18 yS1 makelock(ttyS1) called 02/26 01:43:18 yS1 do_makelock: lock='/var/lock/LCK..ttyS1' 02/26 01:43:18 yS1 lock not made: lock file exists 02/26 01:43:18 yS1 lock file exists (dialout)! 02/26 01:43:18 yS1 lockfile found, pid=306 02/26 01:43:18 yS1 utmp + wtmp entry made 02/26 01:43:18 yS1 lockfile found, pid=306 02/26 01:43:28 yS1 lockfile found, pid=306 02/26 01:43:38 yS1 lockfile found, pid=306 02/26 01:43:48 yS1 lockfile found, pid=306
