Hi David
But what is the exact syntax of this command
route add default next hop bcm600
each time i give this command i get a syntax error .
Can you please give the exact systax .

Regards
sidaty


----- Original Message -----
From: David Lipovkov <[EMAIL PROTECTED]>
To: Mohamed Lemine O/ Sidaty <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, April 04, 2000 9:17 AM
Subject: Re: Please Help routing configuration


> Hi,
> > my internet gateway bcm600 has local ip adress 172.16.4.60
> > another machine called mail wich has 172.16.4.17 as its local ip adress
> >
> > 193.251.145.29 is my domain ip adresse , my provider is 193.251.145.250
> > i reach it without difficulty with a PPP link as it can be seen in the
following route command output :
> >
> > [root@bcm600 /etc]# route
> > Kernel IP routing table
> > Destination            Gateway         Genmask         Flags Metric Ref
Use Iface
> > bcm600                  *               255.255.255.255    UH    0
0        0 eth0
> > 193.251.145.250    *               255.255.255.255   UH    0      0
0 ppp0
> > 172.16.0.0              *               255.255.0.0          U     0
0        0 eth0
> > 127.0.0.0               *               255.0.0.0               U     0
0        0 lo
> > default         193.251.145.250 0.0.0.0                   UG    0      0
0 ppp0
> >
> > my named run on the above machine.
> >
> > here the route command output for the machine mail
> > [root@mail /etc]# route
> > Table de routage IP du noyau
> > Destination     Passerelle      Genmask           Indic Metric Ref
Use Iface
> > 172.16.4.17     *                   255.255.255.255  UH     0       0
0 eth0
> > 193.251.145.0   bcm600          255.255.255.0   UG     0       0
0 eth0
> > 172.16.0.0        *               255.255.0.0     U     0        0
0       eth0
> > 127.0.0.0         *               255.0.0.0       U        0        0
0         lo
> >
> >
> > My question is how shall i do or add as default route on machine mail to
reach 193.251.145.250 (my provider) .
> > and then have outgoing mail trafic routed to my provider .
> I think the following should work: on mail machine add defaulte route with
next hop
> bcm600, on bcm600 make sure ip forwarding enabled, if 172.16.4.17 is known
outside
> your network(no masquarading) make sure your provider has route to
172.16.4.17 with next hop bcm600.
>
> Regards
>
> --
> David Lipovkov
>
> Nbase-Xyplex Communications
>
> "You know, I know this steak doesn't exist. I know that when I put it in
my
> mouth, the Matrix is telling my brain that it is juicy and delicious.
After
> nine years, you know what I realize? Ignorance is bliss."
>
>                 -- Cypher, "The Matrix"

-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]

Reply via email to