On 30 May 00, at 11:29, Joseph Eggleston wrote:
Hi Joe; hi all,
in this moment, I face exactly the same problem:
if I use the arp-command without setting the 'pub'-flag, the entry in
the arp table is all right; but if I try to set the 'pub'-flag, the arp table
contains a ' * ' instead of the hardware-address and the machine
does not react to arp requests.
I use SuSE-Linux 6.3 with a 2.2.14 kernel which is patched for
Divert-sockets.
Can anybody help to solve this problem?
thanks in advance!!
Ralf
> Mobile IP uses proxy arp so that the home agent can continue to reply to
> arp requests for the mobile host when the mobile host is away from the
> home network. I am having trouble getting this to work under linux
> (2.2.14). I've tried commands like:
> arp -i eth0 -Ds 145.1.193.46 eth0 pub
> After this /proc/net/arp has the following entry:
> 145.1.193.46 0x1 0xc 00:00:00:00:00:00
> * eth0
> and arp gives:
> 145.1.193.46 * *
> MP eth0
>
> but the machine will not reply to arp requests.
>
> Does anyone have any insight into this problem?
>
> thanks!
> Joe
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
