On Friday 23 January 2004 05:04, Beolach wrote: > chuck wrote: > > [snip] > > > > OBTW, when I > > > > ping -I eth0 192.168.1.1 > > ping: bad interface address 'eth0' > > > > is what I get. I do have an eth0 device. :-| > > The -I option doesn't take an interface name (ie eth0), but rather the > IP address (ie 192.168.0.1) assigned to the interface.
Get your facts right, it does take an interface name as option. >From the manual page of ping; -I interface address Set source address to specified interface address. Argument may be numeric IP address or name of device. When pinging IPv6 link-local address this option is required. [EMAIL PROTECTED]:/# ping -I eth0 192.168.10.23 PING 192.168.10.23 (192.168.10.23) from 192.168.10.15 eth0: 56(84) bytes of data. 64 bytes from 192.168.10.23: icmp_seq=1 ttl=255 time=0.151 ms 64 bytes from 192.168.10.23: icmp_seq=2 ttl=255 time=0.148 ms 64 bytes from 192.168.10.23: icmp_seq=3 ttl=255 time=0.153 ms Now if i try that from my router then i get the same as Chuck gets, why it is i dont know and to be honest i dont really care as i do not see the point in using the -l option in this case period. Now if you explain your problem AND show us the configuration you use "To the letter" then maybe someone here can help you to solve your problem. The examples i sent you and the most explanatory mail from Ray should have given you enough infomation to have solved it anyway. > Conway S. Smith > -- If the Linux community is a bunch of theives because they try to imitate windows programs, then the Windows community is built on organized crime. Regards Richard [EMAIL PROTECTED] http://people.zeelandnet.nl/pa3gcu/ - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs