LENGARD Pascal OCISI wrote:
> Are you trying to mount a RW CDROM in your ordinary CDROM drive ? maybe
> it does not support this (many cdrom drives do not).
> forgive me if you have already checked this, i think that no idea is too
> stupid to be suggested ...
> pascal
Hi,
No, it's an ordinairy CD-ROM (I bought StartOffice to be precise)
Greets
Jeroen
>
>
> -----Message d'origine-----
> De: Jeroen [SMTP:[EMAIL PROTECTED]]
> Date: lundi 24 août 1998 01:26
> À: Richard Adams; linux-newbie
> Objet: RE:I/O error
>
> Hi,
>
> I've got NLS enabled.
> I can mount every CD(-ROM) with my CD-RW (prim. master) without
> problems. The SCSI
> emu is for being able to use the RW.
> But can't mount the CD-ROM's with my ordineary CD-ROM drive (prim.slave)
>
> Tryd it again and get:
> mount /dev/sr9 /mnt
> sr_photocd: ioctl error (SONY/PIONEER): ox28000000
> sr_photocd: ioctl error (SONY/PIONEER): ox28000000
> CD-ROM I/O error: dev 0b/0a, sector0
> /dev/sr9: I/O error
> mount: block device /dev/sr9 is write-protected, mounting read-only
>
> the above twice again, then
> FAT bread failed
> mount: you must specify the filesystem type
>
> Then I tryd with specifying as iso9660 but got again a bunch of errors.
>
> I don't get why it states 'photocd' .
> And this is with the same CD-ROM I was able to mount with the CD-RW.
>
> Greetings,
> Jeroen
>
> Richard Adams wrote:
>
> According to Karl F. Larsen: While burning my CPU.
> >
> >
> > You need to go back and recompile your kernel and specify that
> the
> > kernel have a ISO turned on that is necessary for data cd-roms. I
>
> can't
> > find easly the exact name but it's there on all newer kernels.
> >
>
> Huum...
>
> Karl leave the bootleg wiskey alone.
>
> Its easy to find, "iso9660 filesystem". If the person concerned has
>
> 2.0.34
> or later then he will need to say "y" to NLS support when doing a make
>
> config otherwise he will not be presented with any options for dos,
>
> vfat,
> is09660 and/or the likes thereof.
>
> BTW, it was also included in earlier kernels as well iso9660 is NOT so
> new.
>
> > On Sat, 22 Aug 1998, Jeroen wrote:
> >
> > > Hi,
> > >
> > > I've installed a new CD-ROM drive and when I try to mount a data
>
> cdrom I
> > > get:
> > >
> > > bash# mount /dev/sr9 /mnt
> > > /dev/sr9: I/O error
> > > mount: block device /dev/sr9 is write protected, mounting
> read-only
> > > /dev/sr9: I/O error
> > > mount: you must specify the filesystem type
> > >
> > > I use SCSI emulation.
> > > Can someone help me out here?
> > >
> > > Greetings,
> > > Jeroen
> > >
> > > --
> > > ***WE WILL EITHER FIND A WAY, OR MAKE ONE***
> > > Hannibal
> > >
> > >
> > >
> > >
> >
> > Best wishes
> >
> > - Karl F. Larsen, 3310 East Street, Las Cruces,NM (505) 524-3303
>
> -
> >
>
> --
> Regards Richard.
> [EMAIL PROTECTED]
>
> --
> ***WE WILL EITHER FIND A WAY, OR MAKE ONE***
> Hannibal
--
***WE WILL EITHER FIND A WAY, OR MAKE ONE***
Hannibal