Ok cool I'll have a look at that as soon as I get home tonight
-----Original Message-----
From: Ray Olszewski [SMTP:[EMAIL PROTECTED]]
Sent: Friday, 29 January 1999 12:20
To: [EMAIL PROTECTED]; '[EMAIL PROTECTED]'
Subject: RE: PPP setup problems
At 12:04 PM 1/29/99 +1100, Peter kazdera wrote [deletions]:
>I have set it to 56700 and it works fine with "minicom" and you would
>expect it to use the 16550 UART chip and in so doing it would be capable of
>speeds up to 115k with no problems but this does not seem to be the case
>now the question is why is that ??
Might this be a simple typo? I usually see the speed as 57600 (that is, 2 *
28800), not 56700. In fact, 57600 is what is in the script file you
attached; the lines are:
#Pur serial line speed here.
SPEED=57600
So might it be the case that you have a different copy of the script with a
typo in it, and that's the copy you are actually running? The messages file
you sent earlier really did say "56700" -- it's not a typo on my part.
------------------------------------"Never tell me the odds!"---
Ray Olszewski -- Han Solo
762 Garland Drive
Palo Alto, CA 94303-3603
650.321.3561 voice 650.322.1209 fax [EMAIL PROTECTED]
----------------------------------------------------------------
