The enclosed appears to indicate Unsolicited Commercial Email was relayed
through your network.
Please investigate and take appropriate action.
"L. A. Mulieri" wrote:
> Hi,
> I have a similar problem with Redhat 5.2 only the displacement and
> partial repeat of the screen occurs in the vertical direction. I have a
> black band at the lower 1/8 of screen. Below this a small portion of the
> of a second copy of the screen appears. It looks like vertical sync
> problems on a TV screen but it's stationary rather than rolling. I'm
> running this on a Gateway 2100 and had to select LCD screen as only option
> for video card. My card is:
> SOLO2100: Video Controller= Cirrus 7548 with DCI/Direct draw
> compatability,
> motion video acceleration, continuous X/Y upscaling to 1024 x 768, and
> an enhanced Bit-BLT engine. Video Subsystem Interface: 32-bit PCI bus
> memory interface.
>
> Monitor frequencies: horiz 38.6, vert 60 Hz
>
> When I try to change the video scanning specs and/or resolution the
> installation program keeps changing it back to the ~600 x ~800 values.
> What should I try? Thanks for suggestions.
>
> Lou Mulieri
> Hinesburg, VT
>
> On Sat, 19 Jun 1999, Herman wrote:
>
> > At 12:09 PM 6/19/99 +0000, [EMAIL PROTECTED] wrote:
> > > I have installed redhat 5.0. when I am working in x windows
> > > one part of my x-window (for example the right portion) is out
> > > of the screen and is coming on the left hand side.The pointer
> > > is not pointing to the right position for example If I bring
> > > the pointer to any position and click it does'nt proceed
> > > further for that I have to bring the pointer slightly to
> > > the right of the particular position
> >
> > I had the same problem. I had to select a different monitor
> > to solve the problem. My video-card was detected OK.
> >
> > Herman Aa.
> >
> >
> >
