Ok i finally have some time to work on this dsl with linux thing. It
works in windows. Below is what /proc/pci says
Bus 0, device 9, function 0:
Ethernet controller: LiteOn LNE100TX (rev 32).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
I/O at 0xf800 [0xf801].
Non-prefetchable 32 bit memory at 0xfedeec00 [0xfedeec00].
The error at start up is that the pci bus has not enabled the device
at 0/72, which produces the siocsiflags error cannot find gateway
One thing I note is that /proc/pci says master capable. I see from my
bios set up that I have three pci devices, none with master enabled.
Would this help?
Thanks to all of you who replied privately. To
Shirley, how do I run l my machine as a router? And why dhcpd if I
have a static address
-- Bob Rea
Freedom is only privilege extended
unless enjoyed by one and all
--Billy Bragg
[EMAIL PROTECTED] [EMAIL PROTECTED]
www.sirius.com/~rear
