On Thu, 15 Jun 2000, Chuck Lam wrote about, Re: How to mount the extra drive:
> I can make the drive containing RH6.1 to be the
> master, but I need to be able to see it first. Thank
> you for the info ....I'll try to see if I can make it
> work..
Ray has explained a few things, however if your "machine" does not see the
drive then you have either, Not set the BIOS correctly, most modern BIOS'es
are set to "auto" so that should not be the problem, or the jumper settings
are in corret on the drives themselfs.
Ray made the point of master and slave and the point of primary and
secondary interface, however i have used a system with only a slave cdrom
on ide1 (secondary interface).
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
