On Mon, Jul 13, 2015 at 07:09:06PM +0200, Pali Rohár wrote: > Hello, here is my objdump of 4.2-rc2 version: > > 00000064 <omap2_mcspi_set_cs>: > 64: e3003182 movw r3, #386 ; 0x182 > 68: e19030b3 ldrh r3, [r0, r3] > 6c: e3130004 tst r3, #4 > 70: 0a000001 beq 7c <omap2_mcspi_set_cs+0x18> > 74: e2711001 rsbs r1, r1, #1 > 78: 33a01000 movcc r1, #0 > 7c: e5902188 ldr r2, [r0, #392] ; 0x188 > 80: e3520000 cmp r2, #0 > 84: 012fff1e bxeq lr > 88: e5923018 ldr r3, [r2, #24] > 8c: e3510000 cmp r1, #0 > 90: 13c33601 bicne r3, r3, #1048576 ; 0x100000 > 94: 03833601 orreq r3, r3, #1048576 ; 0x100000 > 98: e5823018 str r3, [r2, #24] > 9c: e5902188 ldr r2, [r0, #392] ; 0x188 > a0: e5922000 ldr r2, [r2] > a4: e582302c str r3, [r2, #44] ; 0x2c > a8: e592302c ldr r3, [r2, #44] ; 0x2c > ac: e12fff1e bx lr
I have not been able to duplicate the failure on the hardware that I have. I dug out my old Beagleboard and added an SPI registration to the dts. This was the closest hardware that I had to the N900's processor. What is the version of the gcc compiler you are using and where did you get it from? For instance, I am using a 4.9.1 compiler that I built using Yocto. Also are you using devicetree or the old board file board-rx51.c? -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html