On Mon, Jul 13, 2015 at 10:34:21PM +0200, Pali Rohár wrote: > On Monday 13 July 2015 22:28:35 Michael Welling wrote: > > On Mon, Jul 13, 2015 at 07:09:06PM +0200, Pali Rohár wrote: > > > Hello, here is my objdump of 4.2-rc2 version: > > > > > > 00000064 <omap2_mcspi_set_cs>: > > > 64: e3003182 movw r3, #386 ; 0x182 > > > 68: e19030b3 ldrh r3, [r0, r3] > > > 6c: e3130004 tst r3, #4 > > > 70: 0a000001 beq 7c > > > <omap2_mcspi_set_cs+0x18> 74: e2711001 rsbs > > > r1, r1, #1 > > > 78: 33a01000 movcc r1, #0 > > > 7c: e5902188 ldr r2, [r0, #392] ; 0x188 > > > 80: e3520000 cmp r2, #0 > > > 84: 012fff1e bxeq lr > > > 88: e5923018 ldr r3, [r2, #24] > > > 8c: e3510000 cmp r1, #0 > > > 90: 13c33601 bicne r3, r3, #1048576 ; > > > 0x100000 94: 03833601 orreq r3, r3, #1048576 > > > ; 0x100000 98: e5823018 str r3, [r2, > > > #24] > > > 9c: e5902188 ldr r2, [r0, #392] ; 0x188 > > > a0: e5922000 ldr r2, [r2] > > > a4: e582302c str r3, [r2, #44] ; 0x2c > > > a8: e592302c ldr r3, [r2, #44] ; 0x2c > > > ac: e12fff1e bx lr > > > > I have not been able to duplicate the failure on the hardware that I > > have. I dug out my old Beagleboard and added an SPI registration to > > the dts. This was the closest hardware that I had to the N900's > > processor. > > > > What is the version of the gcc compiler you are using and where did > > you get it from? > > > > I'm using gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) from package > gcc-4.6-arm-linux-gnueabi which is available on Ubuntu 12.04 LTS > (version 4.6.3-1ubuntu5cross1.62).
I downloaded and compiled with this compiler and it still does not effect the functionality of the targets that I have. What flags (if any) are you passing to the compiler? Here is my objdump with gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5): 00000074 <omap2_mcspi_set_cs>: 74: e59f304c ldr r3, [pc, #76] ; c8 <omap2_mcspi_set_cs+0x54> 78: e19030b3 ldrh r3, [r0, r3] 7c: e3130004 tst r3, #4 80: 0a000001 beq 8c <omap2_mcspi_set_cs+0x18> 84: e2711001 rsbs r1, r1, #1 88: 33a01000 movcc r1, #0 8c: e5903258 ldr r3, [r0, #600] ; 0x258 90: e3530000 cmp r3, #0 94: 012fff1e bxeq lr 98: e5932018 ldr r2, [r3, #24] 9c: e3510000 cmp r1, #0 a0: 13c22601 bicne r2, r2, #1048576 ; 0x100000 a4: 03822601 orreq r2, r2, #1048576 ; 0x100000 a8: e5832018 str r2, [r3, #24] ac: e5903258 ldr r3, [r0, #600] ; 0x258 b0: e5933000 ldr r3, [r3] b4: e583202c str r2, [r3, #44] ; 0x2c b8: e5903258 ldr r3, [r0, #600] ; 0x258 bc: e5933000 ldr r3, [r3] c0: e593202c ldr r2, [r3, #44] ; 0x2c c4: e12fff1e bx lr c8: 00000252 .word 0x00000252 > > > For instance, I am using a 4.9.1 compiler that I built using Yocto. > > > > Also are you using devicetree or the old board file board-rx51.c? > > I'm using devicetree. > > -- > Pali Rohár > pali.ro...@gmail.com -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html