Hi !
I know, the problem is not really new,
but didn't find a solution for it ...
So how could i change the booting order respectively the recoginize of the
controller by the kernel ... I'm using Scientific Linux 5.3 / 4.6 (REHL5.3/4.6)
...
On my PE R610 i've got two controller, one 6/i and one 6/E witch connected to
a MD1000 ..
After generating a raid6 on the MD1000 and booting the machine,
my system disk (raid1 on 6/i) are on /dev/sdb and the raid6 on /dev/sda
....
So, i want to change back for the system-disk on /dev/sda
lspci -v
03:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev
04)
Subsystem: Dell PERC 6/i Integrated RAID Controller
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at df280000 (64-bit, non-prefetchable) [size=256K]
I/O ports at fc00 [size=256]
Memory at df2c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at df200000 [disabled] [size=32K]
Capabilities: [b0] Express Endpoint IRQ 0
Capabilities: [c4] Message Signalled Interrupts: 64bit+ Queue=0/2
Enable-
Capabilities: [d4] MSI-X: Enable- Mask- TabSize=4
Capabilities: [e0] Power Management version 2
Capabilities: [ec] Vital Product Data
Capabilities: [100] Power Budgeting
04:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev
04)
Subsystem: Dell PERC 6/E Adapter RAID Controller
Flags: bus master, fast devsel, latency 0, IRQ 82
Memory at df180000 (64-bit, non-prefetchable) [size=256K]
I/O ports at ec00 [size=256]
Memory at df1c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at df100000 [disabled] [size=32K]
Capabilities: [b0] Express Endpoint IRQ 0
Capabilities: [c4] Message Signalled Interrupts: 64bit+ Queue=0/2
Enable-
Capabilities: [d4] MSI-X: Enable- Mask- TabSize=4
Capabilities: [e0] Power Management version 2
Capabilities: [ec] Vital Product Data
Capabilities: [100] Power Budgeting
Any idea ?
thanks & cheers
Martin
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
