Robert, why are you running raid on 1 disk???????
What benefit do you expect to derive from running raid on a single
disk?
Unless you have a special application, there is **NO** point to
creating a raid array from one disk.
Chris
On Fri, 14 May 1999, Robert (Drew) Norman wrote:
>
> I can not get raidtools-0.90 to work. I have attempted everything I know
> to do. I have used the raidtools-0.50 before with no problems. I am
> running the following:
>
> Redhat Linux 6.0 with 2.2.8 recompiled kernel.
> 448MB RAM
> raidtools-0.90
> I have a IBM 9GB drive split into 3 partitions of equal size.
>
> Here is my raidtab:
>
>
> raiddev /dev/md0
> raid-level 0
> nr-raid-disks 3
> nr-spare-disks 0
> chunk-size 16
>
> # persistent-superblock 0
> device /dev/sdb1
> raid-disk 0
> device /dev/sdb2
> raid-disk 1
> device /dev/sdb3
> raid-disk 2
>
>
> [root@dnorman-pc /root]# mkraid -f /dev/md0
> DESTROYING the contents of /dev/md0 in 5 seconds, Ctrl-C if unsure!
> handling MD device /dev/md0
> analyzing super-block
> disk 0: /dev/sdb1, 2811343kB, raid superblock at 2811264kB
> disk 1: /dev/sdb2, 2811375kB, raid superblock at 2811264kB
> disk 2: /dev/sdb3, 2811375kB, raid superblock at 2811264kB
> mkraid: aborted
>
>
> Thanks in advance for the help.
> --Drew Norman
>
