On 04/08/2019 11:29 AM, Simon Horman wrote:
> According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of
> August 24, 2018,
Rummaged in Cogent's archives but was unable to find that errata...
> the TX clock internal delay mode isn't supported
> on R-Car E3 (r8a77990) and D3 (r8a77995).
>
> Based on work by Kazuya Mizuguchi.
>
> Signed-off-by: Simon Horman <horms+rene...@verge.net.au>
> ---
> drivers/net/ethernet/renesas/ravb_main.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/renesas/ravb_main.c
> b/drivers/net/ethernet/renesas/ravb_main.c
> index 4f648394e645..be8af4a382cf 100644
> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
> @@ -1969,6 +1969,12 @@ static void ravb_set_config_mode(struct net_device
> *ndev)
> }
> }
>
> +static const struct soc_device_attribute ravb_delay_mode_quirk_match[] = {
> + { .soc_id = "r8a77990", .revision = "ES1.*" },
> + { .soc_id = "r8a77995", .revision = "ES1.*" },
> + { /* sentinel */ }
> +};
I'm OK with this approach (modulo the revisions)...
[...]
> @@ -1979,8 +1985,9 @@ static void ravb_set_delay_mode(struct net_device *ndev)
> priv->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID)
> set |= APSR_DM_RDM;
>
> - if (priv->phy_interface == PHY_INTERFACE_MODE_RGMII_ID ||
> - priv->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID)
> + if ((priv->phy_interface == PHY_INTERFACE_MODE_RGMII_ID ||
> + priv->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) &&
> + !soc_device_match(ravb_delay_mode_quirk_match))
But don't we need to error out of the probing as we can't set the delay mode
requested?
> set |= APSR_DM_TDM;
>
> ravb_modify(ndev, APSR, APSR_DM, set);
MBR, Sergei
