These macros aren't needed any more. They used to be used for SPARC.
Signed-off-by: Matthew Wilcox <[EMAIL PROTECTED]>
---
drivers/scsi/sym53c8xx_2/sym_glue.c | 11 ++++-------
1 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c
b/drivers/scsi/sym53c8xx_2/sym_glue.c
index e731618..a82ed13 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -54,9 +54,6 @@
#define NAME53C "sym53c"
#define NAME53C8XX "sym53c8xx"
-#define IRQ_FMT "%d"
-#define IRQ_PRM(x) (x)
-
struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP;
unsigned int sym_debug_flags = 0;
@@ -1196,8 +1193,8 @@ static int sym_host_info(struct sym_hcb *np, char *ptr,
off_t offset, int len)
copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, "
"revision id 0x%x\n", np->s.chip_name,
np->s.device->device, np->s.device->revision);
- copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n",
- pci_name(np->s.device), IRQ_PRM(np->s.device->irq));
+ copy_info(&info, "At PCI address %s, IRQ %d\n",
+ pci_name(np->s.device), np->s.device->irq);
copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n",
(int) (np->minsync_dt ? np->minsync_dt : np->minsync),
np->maxwide ? "Wide" : "Narrow",
@@ -1283,9 +1280,9 @@ static struct Scsi_Host * __devinit sym_attach(struct
scsi_host_template *tpnt,
unsigned long flags;
struct sym_fw *fw;
- printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq " IRQ_FMT "\n",
+ printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %d\n",
unit, dev->chip.name, pdev->revision, pci_name(pdev),
- IRQ_PRM(pdev->irq));
+ pdev->irq);
/*
* Get the firmware for this chip.
--
1.4.4.2
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
