On 02/25/2013 04:33 PM, Steffen Maier wrote:
Hi Hannes,
I like the idea and most of the patch set, so I only have a few questions left
> and some review comments below.
Just curious: Do you also plan to adapt systemd/udev, especially path_id for
> fc transport with its open coded copy of int_to_scsilun()?
Yes.
Since I don't see zfcp touched in this patch set, assuming this set will get
> merged, I plan to adapt a few spots in zfcp that might not work
with 64 bit
> luns out of the box although most of it already works with 64 bit
luns inside.
Ah. Yes, this might be a good idea. I've already got a patch from
QLogic regarding qla4xxx, so maybe we should be adding them as
separate patches on top of the original patchset.
Speaking of opaque handling of scsi luns: Lately I noticed that some sg3_utils
> tools decode the lun format and only report parts of the entire
64 bit fcp lun,
> e.g. sg_scan or "sg_luns -d". I don't have enough historical scsi
experience to
> know why that is, maybe because of some SPI background. By itself
this is not a
> problem, however, rescan-scsi-bus.sh makes use of those scsi lun
parts and then
> fails when matching those with the full scsi lun exposed by the
midlayer to user
> space. E.g. with flat space addresses of IBM DS8000 this does not
seem to work:
# sg_luns -v -s2 -d /dev/sg2 | head
report luns cdb: a0 00 02 00 00 00 00 00 20 00 00 00
report luns: requested 8192 bytes but got 4112 bytes
Lun list length = 4104 which imples 513 lun entries
Report luns [select_report=2]:
c101000000000000
REPORT LUNS well known logical unit
4020400000000000
Flat space addressing: lun=32
4020400100000000
Flat space addressing: lun=32
4020400200000000
Flat space addressing: lun=32
^^<=== 0x20 of the lun's 1st short
Did I overlook something or are rescan-scsi-bus.sh and maybe other tools really
> broken with some "modern" scsi targets?
Should've been fixed by now.
There was a bug in rescan-scsi-bus.sh which indeed tried to decode
LUNs, but that has been fixed.
On 02/19/2013 09:18 AM, Hannes Reinecke wrote:
The SCSI standard uses a 64-bit value for LUNs, and large arrays
employing large LUN numbers become more and more common.
So move the linux SCSI stack to use 64-bit LUN numbers.
Signed-off-by: Hannes Reinecke <h...@suse.de>
---
drivers/scsi/scsi_proc.c | 2 +-
drivers/scsi/scsi_sysfs.c | 14 ++++----
drivers/scsi/scsi_transport_fc.c | 4 +-
drivers/scsi/scsi_transport_iscsi.c | 4 +-
drivers/scsi/scsi_transport_sas.c | 2 +-
drivers/scsi/sg.c | 4 +-
include/scsi/scsi.h | 2 +-
include/scsi/scsi_device.h | 22 ++++++------
include/scsi/scsi_transport.h | 2 +-
50 files changed, 239 insertions(+), 247 deletions(-)
--- a/drivers/scsi/scsi_proc.c
+++ b/drivers/scsi/scsi_proc.c
@@ -196,7 +196,7 @@ static int proc_print_scsidevice(struct device *dev, void
*data)
sdev = to_scsi_device(dev);
seq_printf(s,
- "Host: scsi%d Channel: %02d Id: %02d Lun: %02d\n Vendor: ",
+ "Host: scsi%d Channel: %02d Id: %02d Lun: %02llu\n Vendor: ",
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
for (i = 0; i < 8; i++) {
if (sdev->vendor[i] >= 0x20)
Is it intentional that you did not adapt scsi_add_single_device(),
> scsi_remove_single_device(), proc_scsi_write() to cope with 64
bit luns?
(in the admittedly old and probably somewhat deprecated procfs interface;
> but then again, proc_print_scsidevice can output 64 bit luns now)
I deliberately did _not_ touch procfs (apart from the necessary
bits). Precisely because it's being marked as deprecated.
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 931a7d9..6e98f05 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -80,7 +80,7 @@ const char *scsi_host_state_name(enum scsi_host_state state)
return name;
}
-static int check_set(unsigned int *val, char *src)
+static int check_set(unsigned long long *val, char *src)
{
char *last;
@@ -90,7 +90,7 @@ static int check_set(unsigned int *val, char *src)
/*
* Doesn't check for int overflow
*/
- *val = simple_strtoul(src, &last, 0);
+ *val = simple_strtoull(src, &last, 0);
if (*last != '\0')
return 1;
}
@@ -99,11 +99,11 @@ static int check_set(unsigned int *val, char *src)
static int scsi_scan(struct Scsi_Host *shost, const char *str)
{
- char s1[15], s2[15], s3[15], junk;
- unsigned int channel, id, lun;
+ char s1[15], s2[15], s3[17], junk;
Since we use automatic base detection with the 3rd argument of simple_strtoull()
> being 0 in check_set() above, I think the user is free to specify
the lun to scan
> for in decimal/octal/hex base for s3.
>
Yes, we could (in principle).
However, it's not quite clear to me what the user is supposed to
enter here in these cases.
Original output from REPORT LUNS?
Output from scsilun_to_int?
So we would need to come up with a proper naming scheme to identify
these kind of things.
However, this should be done with another patch as it's a different
story. scsi_debug has a similar issue, and will need to be updated
for this, too.
With 64 bits, couldn't this need a maximum of 20 decimal digits (plus '\0'
termination)
> which is more than 16? I think this is a legitimate use case as
long as the scsi lun is
> represented in decimal in sysfs so users might just have it from
the h:c:t:l device name there.
While I don't think anyone would specify the lun in octal, it could even need
22 digits.
[Maximum number of digits is ceil(ln(2**64-1)/ln(base)) if I'm not mistaken.]
Yeah, you're right. I need to increase this to the correct size.
+ unsigned long long channel, id, lun;
int res;
- res = sscanf(str, "%10s %10s %10s %c", s1, s2, s3, &junk);
+ res = sscanf(str, "%10s %10s %16s %c", s1, s2, s3, &junk);
ditto
if (res != 3)
return -EINVAL;
if (check_set(&channel, s1))
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index e894ca7..091210f 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -2093,7 +2093,7 @@ fc_timed_out(struct scsi_cmnd *scmd)
* on the rport.
*/
static void
-fc_user_scan_tgt(struct Scsi_Host *shost, uint channel, uint id, uint lun)
+fc_user_scan_tgt(struct Scsi_Host *shost, uint channel, uint id, uint64_t lun)
{
struct fc_rport *rport;
unsigned long flags;
@@ -2125,7 +2125,7 @@ fc_user_scan_tgt(struct Scsi_Host *shost, uint channel,
uint id, uint lun)
* object as the parent.
*/
static int
-fc_user_scan(struct Scsi_Host *shost, uint channel, uint id, uint lun)
+fc_user_scan(struct Scsi_Host *shost, uint channel, uint id, uint64_t lun)
Is it OK, that the maximum lun 2**64-1 overlaps with SCAN_WILD_CARD==~0 from
scsi.h?
It's the same as today, isn't it?
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index be2c9a6..271d23d 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
I guess we cannot adapt sg_ioctl SG_GET_SCSI_ID that easily without breaking
> the user space interface. But how does a user of this interface
know that there
> are 64 bit luns in the kernel but the ioctl cannot handle the new
kernel functionality
> (and may be affected by aliasing)?
Hmm. I thought that SG_GET_SCSI_ID is largely deprecated by now;
every user should be converted to use sysfs.
But yeah, you're right. I'll be looking into that.
Thanks for your input.
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
h...@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html