Hi, Ever since 2.2.0pre8, I have not been able to boot the kernel with scsi-emulation enable for my hp burner. After the aic7xxx driver (version 5.1.10) detects my scsi hard drive, the cdr gets detected and the kernel stops booting: Detected scsi CD-Rom at sr0 at scsi1, channel 0, id 0, lun 0 SCSI Channel 0:resetting for second half of retries. SCSI bus is being reset for host 1 channel 0. SCSI: aborting command due to timeout: pid 25, scsi 1, channel 0, id 0, lun 1, Request Sense 20 00 00 10 00 scsi: detected 1 SCSI CD-Rom 1 SCSI Disk total. **freezes** Without scsi emulation, it boots fine, but then I can't burn cd's. Kernel 2.0.36 with an older aic7xxx driver (version 5.1.4) boots fine. Is there a newer aic7xxx driver that will fix this? Or is it a problem with scsi-emulation? Thanks, Mike - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [EMAIL PROTECTED]
