Could you try the following:
1) Go to the MB setup and disable features that look like posting.
For example "cache to memory buffers" or something like that, and
friends.
2) Check that the MTRRs registers are correctly configured.
And let me know either if (1) fixes something or (2) seems ok or not ok.
G�rard.
On Fri, 22 Oct 1999, Mario Dix wrote:
> Hi,
>
> I checked all termination things, cable etc. again and again. I am doing this
> for years now and would be very happy to find the problem at my end.
> I doubt that there is the problem. At the moment I am using an (active?) AMP
> -Terminator, but I also tried to terminate directly at the CDROM, which is
> pretty easy.
> The most important fact to me is that with exactly the same HW-Setup the
> installation of RH6.0 works, but RH6.1 fails.
> Below I atttached a few details from the current RH6.0 installation.
>
> In about an hour I'll try to install RH6.1 again from scratch with exact the
> same HW-Setup and hope I can post as much as possible information to you.
>
>
> Regards,
>
> Mario
>
>
>
> --
> Mario Dix / Kirsteinstrasse 54A / 12559 Berlin / Germany / Tel +49 30 65908113
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
