I am not sure how to check (2) but in contrast to my laptop (pentium-II) I can't
find /proc/mtrr on the AMD-box.
Gerard Roudier wrote:
> Could you try the following:
>
> 1) Go to the MB setup and disable features that look like posting.
> For example "cache to memory buffers" or something like that, and
> friends.
>
> 2) Check that the MTRRs registers are correctly configured.
>
> And let me know either if (1) fixes something or (2) seems ok or not ok.
>
> G�rard.
>
> On Fri, 22 Oct 1999, Mario Dix wrote:
>
> > Hi,
> >
> > I checked all termination things, cable etc. again and again. I am doing this
> > for years now and would be very happy to find the problem at my end.
> > I doubt that there is the problem. At the moment I am using an (active?) AMP
> > -Terminator, but I also tried to terminate directly at the CDROM, which is
> > pretty easy.
> > The most important fact to me is that with exactly the same HW-Setup the
> > installation of RH6.0 works, but RH6.1 fails.
> > Below I atttached a few details from the current RH6.0 installation.
> >
> > In about an hour I'll try to install RH6.1 again from scratch with exact the
> > same HW-Setup and hope I can post as much as possible information to you.
> >
> >
> > Regards,
> >
> > Mario
> >
> >
> >
> > --
> > Mario Dix / Kirsteinstrasse 54A / 12559 Berlin / Germany / Tel +49 30 65908113
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
