I'm testing 2.3.99pre3
Machine setup
Initio9100UW
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: FIREBALL SE4.3S Rev: PJ0A
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: TEAC Model: CD-R58S Rev: 1.0N
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: IBM Model: DDRS-39130D Rev: DC1B
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 08 Lun: 00
Vendor: IBM Model: DDRS-34560W Rev: S92A
Type: Direct-Access
Everything goes all right with 2.2.14.
With 2.3.99pre3 FIFO seems to have more gets than puts. It goes down to 0,
causing buffer underrun. I'm using cdrdao 1.1.3 compiled by myself under
2.3.99.
--
Giuseppe "Cowo" Corbelli >> Riding on Linux 2.2.14
------------------------------------------------------
43rd computers law:
"If anything can go wro
fortune : Segmentation fault - Core dumped
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
