Hi,

I have been running 2.1.131 successfully on my SMP system.
One annoying point is the route table gets a double entry for
some reason under 2.1.131 but not on 2.0.36-1 (RH5.2).

ie: I get the following under 2.1.131, but not on 2.0.36-1.

[gmkelly@bushrock gmkelly]$ route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
kyle.zip.com.au *               255.255.255.255 UH    0      0        0 ppp0
10.10.10.0      *               255.255.255.0   U     0      0        0 eth0
10.10.10.0      *               255.255.255.0   U     0      0        0 eth0
127.0.0.0       *               255.0.0.0       U     0      0        0 lo
default         kyle.zip.com.au 0.0.0.0         UG    0      0        0 ppp0

I found that installing a new RH5.2 system on a IDE drive and
then simply loading, compiling and installing 2.1.131 on this 
system (with all is uptodate lib's etc) works. I have checked out
the ./linux-2.1.131/Doucumnetation/Changes, and accordingly
all (expect modutils-2.1.121 which I copied over and installed)
are upto rev. Additionally, ifconfig has been reformated (or has
additional data fields) becasue I get an additional problem.

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:17650 errors:0 dropped:0 overruns:0
          TX packets:0 errors:1713326 dropped:17650 overruns:0

eth0      Link encap:Ethernet  HWaddr 00:40:05:3D:E2:2A
          inet addr:10.10.10.1  Bcast:10.10.10.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0
          TX packets:0 errors:0 dropped:0 overruns:0
          Interrupt:19 Base address:0x8000 

ppp0      Link encap:Point-to-Point Protocol  
          inet addr:61.8.17.241  P-t-P:203.12.97.19  Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:2240 errors:2 dropped:0 overruns:0
          TX packets:0 errors:123539 dropped:1881 overruns:0

Note: the errors in ppp0 & local. Yes I have confirmed that they are not
due to other erroneous conditions by comparing to 2.0.36-1 (RH5.2).

So which util(s) do I need to upgrade to get route and ifconfig to
reflect correct values, which are not reflected in the Changes doco ?

Thanks, Grahame


-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]

Reply via email to