Hi,

any chance this patch get applied? It seems it will not make it into 5.18 ... what did I miss?

Best regards
Philip

On 12.01.2022 at 16:49:27, Philip Rinn wrote:
Enable the audio hardware on the Olimex A64-OLinuXino board family.
Tested on the A64-OLinuXino-2Ge8G-IND variant.

Signed-off-by: Philip Rinn <ri...@inventati.org>
---

Changes in v2: added missing &sound {...} part
Changes in v3: removed HDMI audio part as requested by Jernej Škrabec

arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index ec7e2c0e82c1..6f2674bb1b7f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -58,6 +58,15 @@ wifi_pwrseq: wifi_pwrseq {
        };
 };

+&codec {
+       status = "okay";
+};
+
+&codec_analog {
+       cpvdd-supply = <&reg_eldo1>;
+       status = "okay";
+};
+
 &cpu0 {
        cpu-supply = <&reg_dcdc2>;
 };
@@ -74,6 +83,10 @@ &cpu3 {
        cpu-supply = <&reg_dcdc2>;
 };

+&dai {
+       status = "okay";
+};
+
 &de {
        status = "okay";
 };
@@ -328,6 +341,23 @@ &simplefb_hdmi {
        vcc-hdmi-supply = <&reg_dldo1>;
 };

+&sound {
+       simple-audio-card,aux-devs = <&codec_analog>;
+       simple-audio-card,widgets = "Microphone", "Microphone Jack Left",
+                   "Microphone", "Microphone Jack Right",
+                   "Headphone", "Headphone Jack";
+       simple-audio-card,routing = "Left DAC", "DACL",
+                   "Right DAC", "DACR",
+                   "Headphone Jack", "HP",
+                   "ADCL", "Left ADC",
+                   "ADCR", "Right ADC",
+                   "Microphone Jack Left", "MBIAS",
+                   "MIC1", "Microphone Jack Left",
+                   "Microphone Jack Left", "HBIAS",
+                   "MIC2", "Microphone Jack Right";
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pb_pins>;
--
2.34.1

--
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/linux-sunxi/YjyVXUUNaZageNwC%40inventati.org.

Reply via email to