Hi,

Dne četrtek, 24. marec 2022 ob 17:28:50 CET je Philip Rinn napisal(a):
> Hi,
> 
> any chance this patch get applied? It seems it will not make it into 
> 5.18 ... what did I miss?

Not much, sometimes patches are overlooked. I'll review it again, and if 
everthing is fine, it will be applied for 5.19 once 5.18-rc1 is out.

Sorry for taking it so long.

Best regards,
Jernej

> 
> Best regards
> Philip
> 
> On 12.01.2022 at 16:49:27, Philip Rinn wrote:
> > Enable the audio hardware on the Olimex A64-OLinuXino board family.
> > Tested on the A64-OLinuXino-2Ge8G-IND variant.
> > 
> > Signed-off-by: Philip Rinn <ri...@inventati.org>
> > ---
> > 
> > Changes in v2: added missing &sound {...} part
> > Changes in v3: removed HDMI audio part as requested by Jernej Škrabec
> > 
> >  arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts    | 30 
> > +++++++++++++++++++
> >  1 file changed, 30 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts 
> > b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > index ec7e2c0e82c1..6f2674bb1b7f 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > @@ -58,6 +58,15 @@ wifi_pwrseq: wifi_pwrseq {
> >     };
> >  };
> > 
> > +&codec {
> > +   status = "okay";
> > +};
> > +
> > +&codec_analog {
> > +   cpvdd-supply = <&reg_eldo1>;
> > +   status = "okay";
> > +};
> > +
> >  &cpu0 {
> >     cpu-supply = <&reg_dcdc2>;
> >  };
> > @@ -74,6 +83,10 @@ &cpu3 {
> >     cpu-supply = <&reg_dcdc2>;
> >  };
> > 
> > +&dai {
> > +   status = "okay";
> > +};
> > +
> >  &de {
> >     status = "okay";
> >  };
> > @@ -328,6 +341,23 @@ &simplefb_hdmi {
> >     vcc-hdmi-supply = <&reg_dldo1>;
> >  };
> > 
> > +&sound {
> > +   simple-audio-card,aux-devs = <&codec_analog>;
> > +   simple-audio-card,widgets = "Microphone", "Microphone Jack Left",
> > +               "Microphone", "Microphone Jack Right",
> > +               "Headphone", "Headphone Jack";
> > +   simple-audio-card,routing = "Left DAC", "DACL",
> > +               "Right DAC", "DACR",
> > +               "Headphone Jack", "HP",
> > +               "ADCL", "Left ADC",
> > +               "ADCR", "Right ADC",
> > +               "Microphone Jack Left", "MBIAS",
> > +               "MIC1", "Microphone Jack Left",
> > +               "Microphone Jack Left", "HBIAS",
> > +               "MIC2", "Microphone Jack Right";
> > +   status = "okay";
> > +};
> > +
> >  &uart0 {
> >     pinctrl-names = "default";
> >     pinctrl-0 = <&uart0_pb_pins>;
> > --
> > 2.34.1
> 


-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
To view this discussion on the web, visit 
https://groups.google.com/d/msgid/linux-sunxi/2621573.mvXUDI8C0e%40kista.

Reply via email to