Hi,
On 22-09-15 14:57, Chen-Yu Tsai wrote:
On Tue, Sep 22, 2015 at 8:47 PM, Maxime Ripard
<maxime.rip...@free-electrons.com> wrote:
<snip>
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&chip_id_det_pin>;
+ status = "okay";
+
+ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
Better leave a comment here saying VBUS detection requires AXP209
usb-power-supply support.
Does it? It can be powered by a battery, with or without VBUS, and
that wouldn't be tied to the fact that the power-supply is USB or
something else.
The AXP209 VBUS / USB power-supply also doubles for VBUS detection,
which on most boards is done using a separate GPIO pin. Hans posted
support for the AXP20X power-supply driver, and support in the usb
phy driver using it for VBUS detection.
Ack.
In short, this is not about "power supply" but VBUS detection. IIRC,
if no VBUS detection method is provided, the phy driver just waits a
period of time after an ID pin change and then considers VBUS invalid.
Right, but that is a hack for boards with no / broken vbus detection
(or vbus control), we really want to use vbus-det where available,
so I agree that a TODO comment here would be good.
Regards,
Hans
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
