On Mon, 22 Apr 2002 15:12, Rakesh A. Ughreja wrote: > > > I have compiled 2.4.18 kernel with USB support and instered the > > > usbnet.o module. After insterting the module is the ifconfig command > > > supposed to show any USB device ? In my case it is not showing anything > > > yes but the dmesg shows the module is successfully inserted. > > > > You should see a device "usb0" on each end. > > > > Are you using the -a (show all) option to ifconfig? > > Otherwise you only get the interfaces that are configured. > > Yes, I am using ifconfig -a option. but it is not showing any usb0 device. > Currently I am experimenting on single PC. with no cable connected to any > ports. I am able to successfully load all the necessory modules. lsmod > shows usage count 0. > > What can be the possible reasons for not showing usb0 ? UTSL.
How about you provide some of the information you have: contents of /proc/bus/usb/devices contents of /proc/bus/usb/drivers dmesg output when you plug in the device output of ifconfig -a Brad _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
